DISTRIBUTION OF VALUABLE METALS IN FLOTATION WASTES OF THE KAJARAN CONCENTRATOR AND PROSPECTS OF THEIR EXTRACTION

Authors

A.M. HOVHANNISYAN National Polytechnic University of Armenia Author
H.S. MANUKYAN National Polytechnic University of Armenia Author

Keywords:

ore, waste pulp, solid phase, liquid phase, filtration, drying, extraction

Abstract

The distribution of valuable metals in flotation wastes formed at the Kajaran concentrator in the process of enrichment of copper-molybdenum ores is studied. It is shown that in the solid and liquid phases obtained as a result of filtration of the waste pulp, valuable components are present, which can be extracted, thereby increasing the degree of ore enrichment.

Downloads

pdf

Published

15.04.2026

Issue

Section

Articles

Most read articles by the same author(s)

H.S. MANUKYAN, A.M. ARZUMANYAN, IMPROVING THE OPERATION CHARACTERISTICS AT THIN-BLADЕ PROCESSING WITH MULTI-TOOTH CORUNDUM MILLERS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
A.M. HOVHANNISYAN, D.G. VARDANYAN , N.A. NIKOYAN, INVESTIGATING THE COMPOSITION OF POLYMETALLIC SULFIDE CONCENTRATE WITH A CONTENT OF ZINC AND LEAD , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
A.M. ARZUMANYAN, H.S. MANUKYAN, S.H. HAKOBYAN, T.A. MIRVELYAN, CUTTERS AND CUTTER HEADS FOR THIN BLADE PROCESSING OF NON-FERROUS METALS AND ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)

Similar Articles

B.M. MAMIKONYAN, S.A. GHAZARYAN, MEASUREMENT OF MUTUAL INDUCTANCE OF COILS BY THE PHASE METHOD , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
S.SH. BALASANYAN, H.M. GEVORGYAN, AN AUTOMATED DECISION MAKING SYSTEM FOR RECONFIGURATION OF THE ORE GRINDING SYSTEM STRUCTURE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)
A.A. TADEVOSYAN, A. QUEIROZ, A. RIBEIRO, N.R. HOVHANNISYAN, CHARACTERIZATION OF BIODIESEL SAMPLES USING DIFFERENT AMOUNTS OF IONIC LIQUID , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)
S.V. SARGSYAN, MONITORING THE ELECTROTECHNICAL SYSTEMS OF THE TECHNOLOGICAL PROCESS OF ORE GRINDING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
R.S. PAPOYAN, THE STUDY AND FEATURES OF THE PROCESS OF MECHANICAL MILLING OF ORE IN BALL MILLS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
M.H. KHACHATRYAN, T.R. AVAGYAN, THE TECHNICAL PROPERTIES OF COPPER AND ZINC EXTRACTION FROM POLYMETALLIC CONCENTRATES OF THE KAPAN MINING AND DRESSING PLANT BY THE ENRICHMENT METHOD , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
B.M. MAMIKONYAN, S.A. GHAZARYAN, INVARIANT MEASUREMENT OF THE PARAMETERS OF AN ACTIVE-INDUCTIVE BIPOLAR BY THE PHASE METHOD , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
B.M. MAMIKONYAN, H.A. AVETISYAN, INVESTIGATING THE SENSITIVITY OF THE CONVERSION PARAMETER OF LOW-VOLTAGE CAPACITORS INTO A PHASE SIGNAL , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
M.K. BAGHDASARYAN , D.V. DAVTYAN, USING THE COMPENSATING ABILITY OF THE SYNCHRONOUS MOTOR REACTIVE POWER FOR POWER SAVING IN THE ORE-GRINDING PROCESS , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)
H.H. ALEKSANYAN, I.K. HOVHANNISYAN, S.H. HARUTYUNYAN, DETERMINING CARBOPHOS (MALATHION) IN AQUATIC ENVIRONMENT BY GAS-LIQUID CHROMATOGRAPHY , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)

Previous 21-30 of 115 Next

You may also start an advanced similarity search for this article.