NICKEL DEPOSITION FROM SULPHATE ELECTROLITE IN THE NON-STATIONARY MODE OF ELECTROLYSIS

Authors

S.B. ANTONYAN National Polytechnic University of Armenia Author

Keywords:

direct and alternating currents join influence, the morphology of nickel coating, limit strength, internal voltage, durability, dislocation

Abstract

The joint effect of direct and alternating sinusoidal currents of different amplitudes and frequences on the mechanical properties of the nickel coatings (the strength limit, internal stress) is investigated. The data obtained are compared with the results of structural invetigations. The laws of the crystal grouth and formation of nickel layers in the non-stationary mode of electrolysis are determined.

Downloads

pdf

Published

12.05.2026

Issue

Section

Articles

Most read articles by the same author(s)

S.B. ANTONYAN, THE INFLUENCE OF ALTERNATING CURRENT AMPLITUDE AND FREQUENCY ON THE PROCESS OF THE COPPER COVERING FORMATION , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)

Similar Articles

S.B. ANTONYAN, THE INFLUENCE OF ALTERNATING CURRENT AMPLITUDE AND FREQUENCY ON THE PROCESS OF THE COPPER COVERING FORMATION , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)
M.G. STAKYAN, H.A. GHAZARYAN, A CALCULATION METHOD FOR ESTIMATING THE BEARING CAPACITY OF STRUCTURAL COMPONENTS OF GAS-MAIN PIPELINES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
M.G. STAKYAN, N.V. PIRUMYAN, A.V. MARTIROSYAN, A COMPLEX TECHNOLOGY FOR INCREASING THE BEARING CAPACITY OF GAS TRANSMISSION PIPELINES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
P.L. YEREMYAN, PECULIARITIES OF OBTAINING HIGH-STRENGTH DEFORMABLE ALUMINUM-BASED ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
N.Z. GRIGORYAN, E.V. KURGHINYAN, S.S. ALAVERDYAN, L.A. VARDANYAN, ELECTRICAL STRENGTH OF THIN DIELECTRIC LAYERS AND THEIR PRESENTATION IN TERMS OF THE PROBABILITY DISTRIBUTION FUNCTION , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
M.S. TOROSYAN, M.G. STAKYAN, THE IMPACT OF HARDENED TECHNOLOGIES ON THE CICLIC STRENGTH AND DURABILITY OF MACHINE PARTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
H.S. CHIBUKHCHYAN, P.YU. GASPARYAN, RESEARCH OF IMPROVEMENT OF MECHANICAL PROPERTIES OF THIN-WALLED PARTS USED IN AVIATION TECHNOLOGY , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
S.G. AGHBALYAN, A.A. PETROSYAN, PH.L. YEREMYAN, METHODS AND PECULIARITIES OF OBTAINING ALUMINIUM-BASED HIGH-STRENGTH DEFORMED ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
L.H. ALEKSANYAN, G.KH. GHAZARYAN, A.W. SHAHINYAN, ANALYSIS OF THE ECONOMIC DAMAGE TO OVERHEAD POWER LINES WITH INSULATED WIRES IN ELECTRIC NETWORKS WITH A VOLTAGE OF 0.38/0.22 KV , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)
A.S. TADEVOSYAN, T.H. NASOYAN, A.A. TADEVOSYAN, ANALYSIS OF THE CONSUMERS OF MARKETING STRATEGIES OF THE RA MOBILE MARKET OPERATORS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)

1-10 of 183 Next

You may also start an advanced similarity search for this article.