INVESTIGATING THE EXPERIMENTAL AND THEORETICAL RESULTS OF THE  WORK OF HIGH-PRESSURE CONDUCTOR BEARINGS AND IMPROVING THE CALCULATION METHODS

A.A. MURADYAN

INVESTIGATING THE EXPERIMENTAL AND THEORETICAL RESULTS OF THE WORK OF HIGH-PRESSURE CONDUCTOR BEARINGS AND IMPROVING THE CALCULATION METHODS

Authors

A.A. MURADYAN National Polytechnic University of Armenia Author

Keywords:

bolt, diagram, contact forces, efforts, deformation, slide

Abstract

The analysis of the experimental data has enabled to present a more accurate form of the calculation resistance diagram P-Δ, and approximate the calculation scheme to the real scheme of the operation of high-pitch joints.

Downloads

pdf

Published

06.04.2026

Issue

Vol. 2 (2020)

Section

Articles

Most read articles by the same author(s)

A.A. MURADYAN, STUDYING THE EXPERIMENTAL AND THEORETICAL RESULTS OF STRENGTH BOLTED JOINTS USING COMPUTER PROGRAMMING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)

Similar Articles

M.S. TOROSYAN, M.G. STAKYAN, THE IMPACT OF HARDENED TECHNOLOGIES ON THE CICLIC STRENGTH AND DURABILITY OF MACHINE PARTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
M.G. STAKYAN, N.V. PIRUMYAN, A.V. MARTIROSYAN, A COMPLEX TECHNOLOGY FOR INCREASING THE BEARING CAPACITY OF GAS TRANSMISSION PIPELINES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
A.R. KHACHATRYAN, A.S. SARGSYAN, INVESTIGATING THE IMPACT OF MECHANICAL DEFORMATIONS ON THE FIELD DISTRIBUTION IN THE ANTENNA APPERTURE FOR THE ROT-54/2.6 RADIO TELESCOPE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2018)
V.G. MUSAYELYAN, V.G. MUSAYELYAN, INVESTIGATING THE DEFORMATION PROCESS OF A THIN-WALL¬E¬D GRIDER OF A CLOSED PROFILE AT A FRONTAL COLLISION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
S.H. KHACHATRYAN, AN ALGORITHM FOR IMAGE DEFORMATION OBTAINED FROM THE CAMERA OF MOBILE DEVICES IN THE ANDROID SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)
G.L. PETROSYAN, A.H. DAVTYAN, INVESTIGATING THE DRAWING PROCESS OF A RECTANGULAR SECTION SINTERED SAMPLE IN A WEDGE-SHAPED DIE , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
T.N. PETROSYAN, INVESTIGATING THE FERRO-ELECTRIC MEMORY ELEMENT STRUCTURES AND THE PRINCIPLES OF CAPACITOR CONSTRUCTION , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)
G.A. SHAHBAZYAN, DEVELOPING THE BLOCK OF CORRELATION PREDICTION OF BRANCH INSTRUCTIONS IN MODERN PROCESSORS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2021)
A.H. DAVTYAN, COMPUTER SIMULATION OF DRAWING A RECTANGULAR SECTION SAMPLE IN A WEDGE-SHAPED DIE AT DIFFERENT ANGLES OF INCLINATION OF THE WEDGE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
H.K. MKRTCHYAN, M.A. BALASANYAN , B.S. BALASANYAN, THE DRUG VESSEL OF THE IRRIGATION SYSTEM OF THE DENTAL AUTONOMOUS ULTRASONIC EQUIPMENT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)

Previous 21-30 of 61 Next

You may also start an advanced similarity search for this article.