CONSIDERING THE TEMPERATURE FACTOR AT DRILLING GEOTERMAL WELLS AT CHOOSING GROUTING MIXTURES

Authors

L.S. AVANESOVA National Polytechnic University of Armenia Author
G.S. AKOPDJANYAN National Polytechnic University of Armenia Author

Keywords:

water-steam mixture, flush fluid, temperature factor, cement, grouting mixture, well environment

Abstract

The high temperature of the well environment infliences most technological processes proceeding in water-steam mixture at the operation of the well, as well as the properties of the flush fluid and the grouting solution. An attempt is made to choose cementing mixtutes at boring wells on steam hydrothermals which are more rational and economically efficient.

Downloads

pdf

Published

29.06.2026

Issue

Section

Articles

Most read articles by the same author(s)

Similar Articles

A.M. SEDRAKYAN, V.G. MARGARYAN, THE PHYSICAL PARAMETER CHARACTERIZING THE HEAT FLOW AS A FACTOR FOR CREATING THE ENVIRONMENT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
A.YE. MOVSISYAN, APPROPRIATENESS OF APPLYING A TURBOEXPANDER WORKING WIDTH NATURAL GAS ON THE STEAM-GAS POWER STATION “HRAZDAN-5” , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
A.V. TADEVOSYAN, A.A. SAFARYAN, T.S. BAGDASARYAN, THE IMPACT OF THE MINING INDUSTRY TAILINGS ON THE ENVIROMENT AND THE WAYS OF ITS REDUCTION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
H.S. CHIBUKHCHYAN, G.S. CHIBUKHCHYAN, M.Y. ZAKARYAN, A ROBOT MANIPULATOR FOR COLLECTING THE DOMESTIC WASTE FROM WATER SURFACES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
R.Z. AYVAZYAN, A.M. SARGSYAN, R.A. AVETYAN, THE IMPACT OF CLAY-GYPSUM ON THE SETTING TIME OF CEMENT , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
V.Z. MARUKHYAN, A.S. ARAKELYAN, COMPARATIVE ANALYSIS OF SURFACE CONDENSERS FROM THE STANDPOINT OF THEIR EFFICIENCY , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)
V.SH. GRIGORYAN, M.S. MAMYAN, KH.N. HAKOBYAN, B.S. BALASANYAN, THE POSSIBILITIES OF FORMING SPECIAL TECHNOLOGICAL ENVIRONMENTS WITH ULTRASONIC EMULSIFICATION FOR THE HEAT TREATMENT OF MACHINE PARTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
R.A. AVETYAN, L.V. CHARKHIFALAKYAN, COMPARATIVE ECONOMIC ASSESSMENT OF ENVIRONMENT PROTECTION MEASURES FOR PREVENTING EMISSIONS AT WET AND DRY METHODS OF CEMENT PRODUCTION , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)
H.M. HOVHANNISYAN, APPLYING THE TECHNOGENIC PRODUCTS WITH HYDROACTIVE MINERALS AS ADSORBENTS FOR PURIFYING THE WATER AREAS AND PROTECTING THE ENVIRONMENT , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
G.H. ASCHYAN, T.Sh. TADEVOSYAN, DEVELOPING A TECHNOLOGY FOR OBTAINING ASBESTOS-FREE BRAKE PADS WITH REQUIRED FUNCTIONAL PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)

1-10 of 215 Next

You may also start an advanced similarity search for this article.