CONSIDERING THE TEMPERATURE FACTOR AT DRILLING GEOTERMAL WELLS AT CHOOSING GROUTING MIXTURES

Authors

L.S. AVANESOVA National Polytechnic University of Armenia Author
G.S. AKOPDJANYAN National Polytechnic University of Armenia Author

Keywords:

water-steam mixture, flush fluid, temperature factor, cement, grouting mixture, well environment

Abstract

The high temperature of the well environment infliences most technological processes proceeding in water-steam mixture at the operation of the well, as well as the properties of the flush fluid and the grouting solution. An attempt is made to choose cementing mixtutes at boring wells on steam hydrothermals which are more rational and economically efficient.

Downloads

pdf

Published

29.06.2026

Issue

Section

Articles

Most read articles by the same author(s)

Similar Articles

Z.A. MINASYAN, A.G. ATOYAN, STUDYING THE STRENGTH OF ADHESIVE AND GLUE-THREAD JOINTS OF FOOTWEAR , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
A.V. HARUTYUNYAN, H.G. DANIELYAN, FORMATION OF NOBLE AND NON-FERROUS METAL DEPOSITS IN VARIOUS REGIONS OF THE EARTH (ON THE EXAMPLE OF MINOR CAUCASUS) , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
G.H. KIRAKOSYAN, V.G. KHACHATRYAN, L.G. KIRAKOSYAN, K.A. AVETISYAN, DEVELOPING A CONTROLLER FOR A PHOTOVOLTAIC SYSTEM BY NEURAL NETWORKS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2021)
A.A. ARISTAKESYAN, A.A. ISAKOV, G.H. TOROSYAN, PYROLYTIC RECYCLING OF POLIMER WASTES , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)
V.A. BALAYAN, E.H. MASHAKARYAN, EXPERIMENTAL STUDIES ON DETERMINING THE RATIONAL RATIO OF FILLERS IN SELF-CURING CONCRETE PRODUCTS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
L.A. DEMIRCHYAN, A.V. GALSTYAN, RAINWATER COLLECTION IN BUILDING DRAINPIPE AND PROSPECTS FOR ITS USE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
N.K. BADALYAN, R.R. VARDANYAN , STUDYING THE DUST AND HEAT IMPACTS ON THE EFFICIENCY OF SOLAR PHOTOELECTRIC MODULES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
V.Z. MARUKHYAN, N.YU. DAVTYAN, ANALYSIS OF METHODS OF DETERMINING THE SUITABILITY OF CAPACITORS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
B.S. BALASANYAN, ORGANIZATION OF INTERMEDIATE AND FINAL TESTING OF KNOWLEDGE OF STUDENTS AT THE CHAIR OF MACHINE-BUILDING TECHNOLOGIES AND AUTOMATION , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)
P.H. SHIRINYAN, G.H. KIRAKOSYAN, J.S. SEVOYAN, V.V. MURADYAN, DEVELOPING A TEMPERATURE MEASURING SYSTEM USING THE PLATFORM ARDUINO IN MATLAB , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)

Previous 21-30 of 215 Next

You may also start an advanced similarity search for this article.