THE SYSTEM OF REQUIREMENTS SET TO METALLIC TECHNOGENIC MINERAL RAW MATERIALS

A.V. MUSAYELYAN; H.G. GEVORGYAN

THE SYSTEM OF REQUIREMENTS SET TO METALLIC TECHNOGENIC MINERAL RAW MATERIALS

Authors

A.V. MUSAYELYAN National Polytechnic University of Armenia Author
H.G. GEVORGYAN National Polytechnic University of Armenia Author

Keywords:

metal technogenic reserves, condition parameter system, minimum industrial content, conventionally useful component, recovery ratio, cost, price

Abstract

Technical and technological and economic parameters are studied and substantiated required of metal technogenic deposits of Armenia whose application will allow to determine the status of the studied field,as well as solve the ecology problems.

Downloads

pdf

Published

29.06.2026

Issue

Vol. 2 (2017)

Section

Articles

Similar Articles

R.L. ATOYAN, RESULTS OF THE DIFFERENTIATED CALCULATION OF THE SOTK GOLD ORE DEPOSIT AND GOLD RESOURCES DEPENDING ON THE LENGTH OF THE MAXIMUM PERMISSIBLE INTERVAL OF NON-CONDITIONAL ORES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
YU.A. AGHABALYAN, A.A. MIRZOYAN, DEFINING THE CONTENT LIMITS OF THE SOTK GOLD DEPOSIT IN CASE OF OPEN-PIT MINING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
KH.V. POGHOSYAN, DIAMOND-METAL COMPOSITIONS USED IN STONE PROCESSING AND THEIR PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
E.G. ZAKARYAN, INVESTIGATING THE PROCESS OF OBTAINING FERROMOLYBDEN¬U-M FROM PRELIMINARY MECHANOACTIVATED TEGHUT MOLYBDENITE CONCENTRATE , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
G.H. ASCHYAN, T.Sh. TADEVOSYAN, DEVELOPING A TECHNOLOGY FOR OBTAINING ASBESTOS-FREE BRAKE PADS WITH REQUIRED FUNCTIONAL PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
K.V. HARUTYUNYAN, PROSPECTS OF PROCESSING TAILINGS FORMED BY THE OPERATION OF DEPOSITS OF METAL USEFUL FOSSIL OF REPUBLIC OF ARMENIA , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
D.H. HUSIKYAN, A.V. AVANESYAN, DETERMINATION OF THE OPTIMAL MATRIX OF IC SEATS (BIC) ON PRINTED BOARDS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2024)
S.G. AGHBALYAN, N.A. ORYAN, A.M. MARTIROSYAN, A.S. AGHBALYAN, KH.V. POGHOSYAN, TECHNOLOGIES FOR PRODUCING METAL-DIAMOND COMPOSITE MATERIALS USED IN STONE-PROCESSEING INDUSTRY AND THEIR PECULIARITIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
S.G. HAYRAPETYAN, M.E. SASUNTSYAN, G.N. MURADYAN, STUDYING THE METAL- COMPOSITION OF THE TECHNOGENIC RESIDUE OF MINERAL RAW MATERIALS OF REPUBLIC OF ARMENIA , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
R.M. YOLCHYAN, G.V. GOULAKYAN, ASSESSMENT AND CONTROL OF THE TECHNICAL CONDITION OF HIGHWAYS USING THE INFORMATION NETWORK , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)

1-10 of 481 Next

You may also start an advanced similarity search for this article.

THE SYSTEM OF REQUIREMENTS SET TO METALLIC TECHNOGENIC MINERAL RAW MATERIALS

Authors

Keywords:

Abstract

Downloads

Published

Issue

Section

Similar Articles

edtor