CHARACTERISTICS OF ANTIFRICTION MATERIALS IN SLIDING BEARINGS

Authors

Y.V. HARUTYUNYAN National Polytechnic University of Armenia Author

Keywords:

sliding bearings, , antifriction materials, self-lubrication, tribology

Abstract

Antifriction materials for sliding bearings and their properties are investigated with the aim of determining theoptimal parameters. Various types of sliding bearings and suitable materials are considered. Special attention is given to modern materials that improve bearing performance under various conditions of operation.

Downloads

pdf

Published

26.02.2026

Issue

Section

Articles

Similar Articles

G.H. ASCHYAN, T.Sh. TADEVOSYAN, DEVELOPING A TECHNOLOGY FOR OBTAINING ASBESTOS-FREE BRAKE PADS WITH REQUIRED FUNCTIONAL PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
L.Z. GALSTYAN, RESEARCH OF THE TECHNOLOGY OF OBTAINING IRON-CHROME STRONG AND DURABLE COMPOSITE MATERIALS REINFORCED WITH COMPONENTS FeCr-K*+STEEL 40 , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
K.A. MANTASHYAN, M.M. ABRAHAMYAN, A.V. ZAPROSYAN, PROCESSES OF HETEROPHASE CHEMICAL CONVERSION OF NATURAL QUARTZITES OF ARMENIA BY THE CHAIN REACTION EFFECT METHOD TO OBTAIN PROMISING MATERIALS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
H.H. HMAYAKYAN, T.T. POGHOSYAN, STUDYING URARTIAN FURNITURE AND PROPOSALS FOR ITS POSSIBLE USE IN MODERN INTERIORS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2025)
M.T. NAJARYAN, IMPROVING THE METHODOLOGY OF TEACHING ENGINEERING DISCIPLINES USING MODERN TEACHING TECHNOLOGIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2025)
A.I. AZIZOV, B.S. BALASANYAN, V.SH. AVAGYAN, SOME FEATURES OF THE PRODUCING BIMETAL COMPOUNDS IN ACCELERATOR TECHNOLOGY , Proceedings of Annual Conferences of NPUA: Vol. 2 (2025)
H.S. PETROSYAN, V.S. GHUKASYAN, K.M. ARSHAKYAN, COMPARISON OF THE LIQUID PHASE IN REINFORCED COMPOSITE MATERIALS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
T.A. DEMIRCHYAN, A.R. DEMIRCHYAN, APPLICATION OF POSSIBLE TECHNOLOGIES FOR PRODUCING CAST IRON PRODUCTS IN THE EARLY IRON AGE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
A.G. KHARATYAN, V.P. BARSAMYAN, THE INFLUENCE OF THE STRUCTURE AND PHYSICO-MECHANICAL INDICATORS OF THE FLEXIBLE ARMOR PLATE ON THE BALLISTIC EFFICIENCY OF CERAMIC PLATES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
S.A. KYUREGHYAN, N.K. MANASYAN, DEVELOPMENT OF A TECHNOLOGY FOR PRODUCING FIRE-PROTECTION AND FIRE-RESISTANT FABRICS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)

1-10 of 12 Next

You may also start an advanced similarity search for this article.