APPLICATION OF LIGHTWEIGHT CONCRETE IN PRE-STRESSED REINFORCED CONCRETE STRUCTURES

Authors

A.G. GYURJINYAN National Polytechnic University of Armenia Author
G.G. GYURJINYAN National Polytechnic University of Armenia Author

Keywords:

lightweight concrete, precision, prismatic precision, cement, plaster

Abstract

The features of using lightweight concrete in pre-stressed reinforced concrete structures are preseuted. Cubic, prismatic, smoothness of growth and cracking of concrete from tuff aggregates in the Lori area as well as Rpr/R ratio and correlation with other concretes are studied. It was suggested to print 0.9.

Downloads

pdf

Published

27.03.2026

Issue

Section

Articles

Similar Articles

V.A. BALAYAN, E.H. MASHAKARYAN, EXPERIMENTAL STUDIES ON DETERMINING THE RATIONAL RATIO OF FILLERS IN SELF-CURING CONCRETE PRODUCTS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
V.A. BALAYAN, S.A. KROYAN, INCREASING THE INTERREMOVAL PERIODS OF ASPHALT CONCRETE COATINGS DUE TO THE APPLICATION OF POLYMER-MINERAL ADDITIVES AND MODERN REGENERATION TECHNOLOGY , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
A.H. GYURJINYAN, ANALYSIS OF SOME PΡOPEΡTIES OF LIGHT CONCΡETES BY THE METHOD OF MATHEMATICAL STATISTICS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
V.A. BALAYAN, S.A. KROYAN, A.V. BALAYAN, SELF-COMPACTING CONCRETES: CHARACTERISTICS, TECHNOLOGY , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
R.Z. AYVAZYAN, A.M. SARGSYAN, R.A. AVETYAN, THE IMPACT OF CLAY-GYPSUM ON THE SETTING TIME OF CEMENT , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
R.A. AVETYAN, L.V. CHARKHIFALAKYAN, COMPARATIVE ECONOMIC ASSESSMENT OF ENVIRONMENT PROTECTION MEASURES FOR PREVENTING EMISSIONS AT WET AND DRY METHODS OF CEMENT PRODUCTION , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)
V.SH. GRIGORYAN, H.S. CHIBUKHCHYAN, B.S. BALASANYAN, ULTRASONIC DEVICES FOR STRENGTHENING THE WORKING SURFACES OF PRISMATIC AND CYLINDRICAL MACHINE PARTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
F.A. PARIKYAN, A.S. BABAYAN, V.G. ASATRYAN, INVESTIGATING THE OPERATION OF THE INDUSTRIAL ROBOT AND DEVELOPING THE CONTROL SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
A.H. GYURJINYAN, PHYSICOMECHANICAL PROPERTIES OF LARGE FILLERS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
N.V. MUGNETSYAN, A PRECISION METHOD FOR STANDARDIZED NORMS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)

1-10 of 22 Next

You may also start an advanced similarity search for this article.