IMPROVING THE OPERATION CHARACTERISTICS AT THIN-BLADЕ PROCESSING WITH MULTI-TOOTH CORUNDUM MILLERS

Authors

H.S. MANUKYAN National Polytechnic University of Armenia Author
A.M. ARZUMANYAN National Polytechnic University of Armenia Author

Keywords:

multi-tooth cutter, corundum, temperature, non-ferrous metal alloys

Abstract

The processes of thin-blade processing of non-ferrous metals and alloys, in particular, the improvement of the operation characteristics of cutting tools, and thermodynamic energy generated by the cutting zone using both traditional and computer programs and modern modeling methods are investigated.

Downloads

pdf

Published

06.04.2026

Issue

Section

Articles

Most read articles by the same author(s)

A.M. HOVHANNISYAN, H.S. MANUKYAN, DISTRIBUTION OF VALUABLE METALS IN FLOTATION WASTES OF THE KAJARAN CONCENTRATOR AND PROSPECTS OF THEIR EXTRACTION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
A.M. ARZUMANYAN, T.A. MIRVELYAN, CALCULATION OF CUTTING STRENGTH AT PROCESSING OF ALLOYS FROM NON-FERROUS METALS BY CORUNDUM CUTTING PLATES WITH SQUARE-CUTTING CUTTING LOOP , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
A.M. ARZUMANYAN, H.S. MANUKYAN, S.H. HAKOBYAN, T.A. MIRVELYAN, CUTTERS AND CUTTER HEADS FOR THIN BLADE PROCESSING OF NON-FERROUS METALS AND ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)

Similar Articles

S.G. AGBALYAN, G.N. MELISETYAN, INFLUENCE OF THE TEMPERATURE RISE AT ONE BRAKING ON THE WEAR-RESISTANCE OF FRICTION MATERIALS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
A.V. MOVSISYAN, A METHOD FOR CALCULATING THE ERRORS OF THE FLATTENED MILLING CUTTERS DURING GRINDING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
H.R. DASHTOYAN, H.R. DASHTOYAN, V.V. BUNIATYAN, FABRICATION AND RESEARCH OF THE Au/BST/Au BULK CERAMIC CAPACITORS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)
P.L. YEREMYAN, PECULIARITIES OF OBTAINING HIGH-STRENGTH DEFORMABLE ALUMINUM-BASED ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
V.V. BUNIATYAN, V.K. BEGOYAN, H.H. HOVNIKYAN, A.A. DAVTYAN, THE METAL - BaxSr1–xTiO3- METAL THIN FILM STRUCTURE C-V, G-V CHARACTERISTICS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2018)
H.S. PETROSYAN, L.Z. GALSTYAN, INVESTIGATING THE STRUCTURIZATION AND MECHANICAL PROPERTIES OF THE FeCr- Ni-Mo MULTICOMPONENT POWDER STEEL OBTAINED BY THE METHOD OF HOT EXTRUSION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
V.S. MELKONYAN, P.H. SHIRINYAN, A MICROCONTROLLER DEVICE FOR MEASURING THE TEMPERATURE OF THE THERMOCOUPLE WITH COLD-JUNCTION COMPENSATION , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)
A.M. ZADOYAN, T.J. SHIRVANYAN NAMAGARDI, N.S. KARAPETYAN, STUDY OF ALLOWING ABILITY OF PHOTOLITHOGRAPHY IN THE TECHNOLOGY OF MANUFACTURING A MULTI-ELECTRODE PROBE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)
A.M. SEDRAKYAN, V.G. MARGARYAN, THE PHYSICAL PARAMETER CHARACTERIZING THE HEAT FLOW AS A FACTOR FOR CREATING THE ENVIRONMENT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
T.J. SHIRINYAN, A.M. ZADOYAN, DEVELOPING THE STRUCTURE AND PREPARATION TECHNOLOGY OF MULTI-ELECTRODE SILICON PROBE FOR THE BIOPOTENTIAL REPRODUCTION , Proceedings of Annual Conferences of NPUA: Vol. 1 (2019)

Previous 21-30 of 140 Next

You may also start an advanced similarity search for this article.