MATERIALS OF BALLS CRUSHING THE METAL ORE IN THE BALL MILL AND THEIR QUALITY REQUIRED

Authors

G.A. VASILYAN National Polytechnic University of Armenia Author
R.S. PAPOYAN National Polytechnic University of Armenia Author
A.S. AGHBALYAN National Polytechnic University of Armenia Author

Keywords:

ball mill, steel, balls, hardness, hardening, quenching, tempering

Abstract

The operating conditions and the properties of the balls used in ball mills are investigated. To provide them, it is proposed to develop a quenching environment which allow to reduce the internal stresses to prevent the cracking, and increase the efficiency of the balls.

Downloads

pdf

Published

18.04.2026

Issue

Section

Articles

Most read articles by the same author(s)

R.S. PAPOYAN, THE STUDY AND FEATURES OF THE PROCESS OF MECHANICAL MILLING OF ORE IN BALL MILLS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
G.A. VASILYAN, T.N. SAFARYAN, T.A. DEMIRCHYAN, A.S. AGHBALYAN, INVESTIGATION OF THE CASTING PROCESS OF DEFORMABLE ALUMINUM ALLOYS OF THE Al-Cu-TiC SYSTEM WITH A HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
S.G. AGHBALYAN, N.A. ORYAN, A.M. MARTIROSYAN, A.S. AGHBALYAN, KH.V. POGHOSYAN, TECHNOLOGIES FOR PRODUCING METAL-DIAMOND COMPOSITE MATERIALS USED IN STONE-PROCESSEING INDUSTRY AND THEIR PECULIARITIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
S.G. AGHBALYAN, G.A. VASILYAN, T.N. SAFARYAN, A.S. AGHBALYAN, T.A. DEMIRCHYAN, SUBSTANTIATION OF THE PRODUCTION PROCESS OF REINFORCED ALUMINUM DEFORMABLE ALLOYS WITH HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)

Similar Articles

S.E. AVETISOV, A.A. GEVORGYAN, A.S. ARAKELYAN, FEASIBILITY OF EQUIPPING A FLOUR MILL WITH A SOLAR PHOTOVOLTAIC SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2021)
H.S. CHIBUKHCHYAN, A.B. BALASANYAN, A.L. ARSHAKYAN, B.A. BALASANYAN, IMPROVING THE STRENGTH OF THIN-WALLED MACHINE PARTS USING THE TECHNOLOGY OF TWO-WAY ULTRASONIC HARDENING , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
M.K. BAGHDASARYAN , T.N. MNOYAN, THE ABNORMAL OPERATING MODES OF SYNCHRONOUS ELECTRIC DRIVE OF AN ORE GRINDING MILL , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
L.Z. GALSTYAN, RESEARCH OF THE TECHNOLOGY OF OBTAINING IRON-CHROME STRONG AND DURABLE COMPOSITE MATERIALS REINFORCED WITH COMPONENTS FeCr-K*+STEEL 40 , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
A.G. KHARATYAN, V.P. BARSAMYAN, THE INFLUENCE OF THE STRUCTURE AND PHYSICO-MECHANICAL INDICATORS OF THE FLEXIBLE ARMOR PLATE ON THE BALLISTIC EFFICIENCY OF CERAMIC PLATES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
V.SH. GRIGORYAN, H.S. CHIBUKHCHYAN, B.S. BALASANYAN, ULTRASONIC DEVICES FOR STRENGTHENING THE WORKING SURFACES OF PRISMATIC AND CYLINDRICAL MACHINE PARTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
S.G. AGHBALYAN, N.A. ORYAN, A.M. MARTIROSYAN, A.S. AGHBALYAN, KH.V. POGHOSYAN, TECHNOLOGIES FOR PRODUCING METAL-DIAMOND COMPOSITE MATERIALS USED IN STONE-PROCESSEING INDUSTRY AND THEIR PECULIARITIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
M.G. HAKOBYAN, G.H. HAKOBYAN, THE POSSIBILITY OF USING ECOLOGICALLY FRIENDLY DIELECTRICS FOR ELECTRICAL DISCHARGE MACHINING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
M.G. STAKYAN, M.S. TOROSYAN, H.A. GHAZARYAN, MODERN TECHNOLOGIES OF STRENGTHENING THE WELDED SEAMS OF THIN -WALL PIPELINES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
G.A. VASILYAN, T.N. SAFARYAN, T.A. DEMIRCHYAN, A.S. AGHBALYAN, INVESTIGATION OF THE CASTING PROCESS OF DEFORMABLE ALUMINUM ALLOYS OF THE Al-Cu-TiC SYSTEM WITH A HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)

Previous 11-20 of 36 Next

You may also start an advanced similarity search for this article.