CUTTERS AND CUTTER HEADS FOR THIN BLADE PROCESSING OF NON-FERROUS METALS AND ALLOYS

A.M. ARZUMANYAN; H.S. MANUKYAN; S.H. HAKOBYAN; T.A. MIRVELYAN

CUTTERS AND CUTTER HEADS FOR THIN BLADE PROCESSING OF NON-FERROUS METALS AND ALLOYS

Authors

A.M. ARZUMANYAN National Polytechnic University of Armenia Author
H.S. MANUKYAN National Polytechnic University of Armenia Author
S.H. HAKOBYAN National Polytechnic University of Armenia Author
T.A. MIRVELYAN National Polytechnic University of Armenia Author

Keywords:

miller, non-ferrous metal, corundum, fine blade machining, cutter head finishing

Abstract

The design of milling cutters and turning tool heads with corundum -plates for thin blade processing of non-ferrous metals and alloys, as well as structures for carrying out research works supported by the RA patents are presented.

Downloads

pdf

Published

29.06.2026

Issue

Vol. 2 (2017)

Section

Articles

Most read articles by the same author(s)

H.S. MANUKYAN, A.M. ARZUMANYAN, IMPROVING THE OPERATION CHARACTERISTICS AT THIN-BLADЕ PROCESSING WITH MULTI-TOOTH CORUNDUM MILLERS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
A.M. HOVHANNISYAN, H.S. MANUKYAN, DISTRIBUTION OF VALUABLE METALS IN FLOTATION WASTES OF THE KAJARAN CONCENTRATOR AND PROSPECTS OF THEIR EXTRACTION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
A.M. ARZUMANYAN, T.A. MIRVELYAN, CALCULATION OF CUTTING STRENGTH AT PROCESSING OF ALLOYS FROM NON-FERROUS METALS BY CORUNDUM CUTTING PLATES WITH SQUARE-CUTTING CUTTING LOOP , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
B.A. BALASANYAN, A.L. ARSHAKYAN, S.H. HAKOBYAN, B.S. BALASANYAN, A PROGRAM FOR CALCULATING THE CUTTING DEPTHS OF THE STAGES OF A MULTI-STAGE DRILL FROM THE EQUALITY CONDITION OF THE PRODUCTS OF THEIR TORQUES AND AXIAL FORCES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)

Similar Articles

T.A. DEMIRCHYAN, A.R. DEMIRCHYAN, A.V. GALSTYAN, R.A. DEMIRCHYAN, PERSPECTIVES OF USING WASTE FORMED WHEN PROCESSING NON-METAL USEFUL FOSSIL , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
S.A. EPISKOPOSYAN, S.A. S.A. GRIGORYAN, MAJORANTS OF THE LEBESGUE CONSTANTS OF THE GENERALIZED WALSH SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 1 (2024)
H.N. KOCHARYAN, M.Z. PETROSYAN, N.R. HOVHANNISYAN, A.H. ARISTAKESYAN, G.H. TOROSYAN, OBTAINING LIQUID AND GASEOUS FUEL FROM LIGNITE AND HYDROCARBON WASTES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
B.A. BALASANYAN, A.L. ARSHAKYAN, S.H. HAKOBYAN, B.S. BALASANYAN, A PROGRAM FOR CALCULATING THE CUTTING DEPTHS OF THE STAGES OF A MULTI-STAGE DRILL FROM THE EQUALITY CONDITION OF THE PRODUCTS OF THEIR TORQUES AND AXIAL FORCES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
ZH.R. PANOSYAN, A.R. MAILIAN, Y.V. YENGIBARYAN, S.G. GRIGORYAN, NANOMETRIC AREAS IN TRIBOSTRUCTURES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)
ZH.R. PANOSYAN, S.S. VOSKANYAN, YE.V. YENGIBARYAN, M.A. YERANOSYAN, PRODUCTION OF DIAMOND-LIKE CARBON FILMS WITH REQUIRED OPTICAL PROPERTIES USING ION PLASMA , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)
O.A. ZADOYAN, M.T. KARAPETYAN, H.A. TOROSYAN, DEVELOPING THE PRODUCTION TECHNOLOGY OF A MDS TRANSISTOR BASED ON THE CARBON NANOTUBE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2018)
G.A. VASILYAN, R.S. PAPOYAN, A.S. AGHBALYAN, MATERIALS OF BALLS CRUSHING THE METAL ORE IN THE BALL MILL AND THEIR QUALITY REQUIRED , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
E.G. ZAKARYAN, INVESTIGATING THE PROCESS OF OBTAINING FERROMOLYBDEN¬U-M FROM PRELIMINARY MECHANOACTIVATED TEGHUT MOLYBDENITE CONCENTRATE , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
H.H. HAKOBYAN, A.G. MALKHASYAN, A.G. POGHOSYAN, THE ANALYSIS OF THE RECOMMENDED TECHNOLOGIC SCHEMES AND PROJECT DECISIONS ON CLEANING SEWAGE IN TTCF TEXTILE ENTERPRISES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)

Previous 31-40 of 82 Next

You may also start an advanced similarity search for this article.

CUTTERS AND CUTTER HEADS FOR THIN BLADE PROCESSING OF NON-FERROUS METALS AND ALLOYS

Authors

Keywords:

Abstract

Downloads

Published

Issue

Section

Most read articles by the same author(s)

Similar Articles

edtor