CUTTERS AND CUTTER HEADS FOR THIN BLADE PROCESSING OF NON-FERROUS METALS AND ALLOYS

A.M. ARZUMANYAN; H.S. MANUKYAN; S.H. HAKOBYAN; T.A. MIRVELYAN

CUTTERS AND CUTTER HEADS FOR THIN BLADE PROCESSING OF NON-FERROUS METALS AND ALLOYS

Authors

A.M. ARZUMANYAN National Polytechnic University of Armenia Author
H.S. MANUKYAN National Polytechnic University of Armenia Author
S.H. HAKOBYAN National Polytechnic University of Armenia Author
T.A. MIRVELYAN National Polytechnic University of Armenia Author

Keywords:

miller, non-ferrous metal, corundum, fine blade machining, cutter head finishing

Abstract

The design of milling cutters and turning tool heads with corundum -plates for thin blade processing of non-ferrous metals and alloys, as well as structures for carrying out research works supported by the RA patents are presented.

Downloads

pdf

Published

29.06.2026

Issue

Vol. 2 (2017)

Section

Articles

Most read articles by the same author(s)

H.S. MANUKYAN, A.M. ARZUMANYAN, IMPROVING THE OPERATION CHARACTERISTICS AT THIN-BLADЕ PROCESSING WITH MULTI-TOOTH CORUNDUM MILLERS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
A.M. HOVHANNISYAN, H.S. MANUKYAN, DISTRIBUTION OF VALUABLE METALS IN FLOTATION WASTES OF THE KAJARAN CONCENTRATOR AND PROSPECTS OF THEIR EXTRACTION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
A.M. ARZUMANYAN, T.A. MIRVELYAN, CALCULATION OF CUTTING STRENGTH AT PROCESSING OF ALLOYS FROM NON-FERROUS METALS BY CORUNDUM CUTTING PLATES WITH SQUARE-CUTTING CUTTING LOOP , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
B.A. BALASANYAN, A.L. ARSHAKYAN, S.H. HAKOBYAN, B.S. BALASANYAN, A PROGRAM FOR CALCULATING THE CUTTING DEPTHS OF THE STAGES OF A MULTI-STAGE DRILL FROM THE EQUALITY CONDITION OF THE PRODUCTS OF THEIR TORQUES AND AXIAL FORCES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)

Similar Articles

S.G. AGHBALYAN, G.A. VASILYAN, T.N. SAFARYAN, A.S. AGHBALYAN, T.A. DEMIRCHYAN, SUBSTANTIATION OF THE PRODUCTION PROCESS OF REINFORCED ALUMINUM DEFORMABLE ALLOYS WITH HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
KH.V. POGHOSYAN, DIAMOND-METAL COMPOSITIONS USED IN STONE PROCESSING AND THEIR PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
T. A. VARDAPETYAN, A.A. GEVORGYAN, AN AUTONOMOUS ENERGY MICROGRID BASED ON SOLAR ENERGY AND HYDROGEN , Proceedings of Annual Conferences of NPUA: Vol. 1 (2024)
A.KH. MKHITARYAN, A METHOD FOR NOISE REJECTION IN SPECIAL-PURPOSE INTEGRATED CIRCUITS, USING DECOUPLING CAPACITORS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2018)
L.S. AVANESOVA, JUSTIFYING THE METHOD OF COMPLEX RESEARCH OF THE RESIDUAL ORE STOCKS AT PROCESSED DEPOSITS BY THE GEOTECHNOLOGICAL METHOD , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
M.G. STAKYAN, N.V. PIRUMYAN, A.V. MARTIROSYAN, A COMPLEX TECHNOLOGY FOR INCREASING THE BEARING CAPACITY OF GAS TRANSMISSION PIPELINES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
A.V. MUSAYELYAN, H.G. GEVORGYAN, THE SYSTEM OF REQUIREMENTS SET TO METALLIC TECHNOGENIC MINERAL RAW MATERIALS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
L.Z. GALSTYAN, RESEARCH OF THE TECHNOLOGY OF OBTAINING IRON-CHROME STRONG AND DURABLE COMPOSITE MATERIALS REINFORCED WITH COMPONENTS FeCr-K*+STEEL 40 , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
B.A. BALASANYAN, A.L. ARSHAKYAN, S.H. HAKOBYAN, B.S. BALASANYAN, A PROGRAM FOR CALCULATING THE CUTTING DEPTHS OF THE STAGES OF A MULTI-STAGE DRILL FROM THE EQUALITY CONDITION OF THE PRODUCTS OF THEIR TORQUES AND AXIAL FORCES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
ZH.R. PANOSYAN, A.R. MAILIAN, Y.V. YENGIBARYAN, S.G. GRIGORYAN, NANOMETRIC AREAS IN TRIBOSTRUCTURES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)

Previous 21-30 of 82 Next

You may also start an advanced similarity search for this article.

CUTTERS AND CUTTER HEADS FOR THIN BLADE PROCESSING OF NON-FERROUS METALS AND ALLOYS

Authors

Keywords:

Abstract

Downloads

Published

Issue

Section

Most read articles by the same author(s)

Similar Articles

edtor