MATERIALS OF BALLS CRUSHING THE METAL ORE IN THE BALL MILL AND THEIR QUALITY REQUIRED

Authors

G.A. VASILYAN National Polytechnic University of Armenia Author
R.S. PAPOYAN National Polytechnic University of Armenia Author
A.S. AGHBALYAN National Polytechnic University of Armenia Author

Keywords:

ball mill, steel, balls, hardness, hardening, quenching, tempering

Abstract

The operating conditions and the properties of the balls used in ball mills are investigated. To provide them, it is proposed to develop a quenching environment which allow to reduce the internal stresses to prevent the cracking, and increase the efficiency of the balls.

Downloads

pdf

Published

18.04.2026

Issue

Section

Articles

Most read articles by the same author(s)

R.S. PAPOYAN, THE STUDY AND FEATURES OF THE PROCESS OF MECHANICAL MILLING OF ORE IN BALL MILLS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
G.A. VASILYAN, T.N. SAFARYAN, T.A. DEMIRCHYAN, A.S. AGHBALYAN, INVESTIGATION OF THE CASTING PROCESS OF DEFORMABLE ALUMINUM ALLOYS OF THE Al-Cu-TiC SYSTEM WITH A HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
S.G. AGHBALYAN, N.A. ORYAN, A.M. MARTIROSYAN, A.S. AGHBALYAN, KH.V. POGHOSYAN, TECHNOLOGIES FOR PRODUCING METAL-DIAMOND COMPOSITE MATERIALS USED IN STONE-PROCESSEING INDUSTRY AND THEIR PECULIARITIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
S.G. AGHBALYAN, G.A. VASILYAN, T.N. SAFARYAN, A.S. AGHBALYAN, T.A. DEMIRCHYAN, SUBSTANTIATION OF THE PRODUCTION PROCESS OF REINFORCED ALUMINUM DEFORMABLE ALLOYS WITH HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)

Similar Articles

L.Z. GALSTIAN, STUDYING THE PRESSING PROCESS BY STEEL FIBER REINFORCED BY FERRO-CHROME POWDER STEEL AND SELECTING THE OPTIMAL MODES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
R.S. PAPOYAN, THE STUDY AND FEATURES OF THE PROCESS OF MECHANICAL MILLING OF ORE IN BALL MILLS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
A.S. PETROSYAN, M.S. SARGSYAN, THE REINFORCING STEEL STRUCTURE OF THE CLASS AT-IIIC AND THE EFFECT OF REHEATING ON THE CHANGE OF ITS MECHANICAL PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
M.G. HAKOBYAN, G.H. HAKOBYAN, THE INFLUENCE OF THE DIELECTRIC LIQUID TYPE ON THE SURFACE HARDNESS OF ELECTRICAL DISCHARGE-MACHINED STEEL 40KH (40Х) , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
H.S. CHIBUKHCHYAN, P.YU. GASPARYAN, RESEARCH OF IMPROVEMENT OF MECHANICAL PROPERTIES OF THIN-WALLED PARTS USED IN AVIATION TECHNOLOGY , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
A.R. SARKISYAN, PHYSICO-MECHANICAL PROPERTIES OF DISPERSELY-HARDENING AND STRENGTHENING LAYERED POWDER COMPOSITE MATERIALS BASED ON COPPER , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
F.A. PARIKYAN, A.S. BABAYAN, INVESTIGATING THE PROCESS OF ROLLING FLAT SURFACES WITH A ROTATING TOOL , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
V.P. BARSAMYAN, R.G. MELIKSETYAN, MODELING AND CALCULATION OF THE IMPACT PHENOMENON ON TWO-LAYER BULLETPROOF VESTS MADE OF COMPOSITE CERAMIC MATERIALS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
S.G. AGHBALYAN, G.A. VASILYAN, T.N. SAFARYAN, A.S. AGHBALYAN, T.A. DEMIRCHYAN, SUBSTANTIATION OF THE PRODUCTION PROCESS OF REINFORCED ALUMINUM DEFORMABLE ALLOYS WITH HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
S.G. AGHBALYAN, A.A. PETROSYAN, PH.L. YEREMYAN, METHODS AND PECULIARITIES OF OBTAINING ALUMINIUM-BASED HIGH-STRENGTH DEFORMED ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)

1-10 of 36 Next

You may also start an advanced similarity search for this article.