PHYSICOMECHANICAL PROPERTIES OF LARGE FILLERS

Authors

A.H. GYURJINYAN National Polytechnic University of Armenia Author

Keywords:

tuffs, mines, investigation, grain composition, experiments, sieve, porous fillers, concrete

Abstract

The physicomechanical properties and the regularities of the change of the crushed stone grain composition obtained as a result of crushing tuff from the Lori Marz deposits are investigated. The test results are processed, and the contact between the sieve hole diameters and the percent quantity of gravels gone through the holes. The experiment results are presented in tables.

Downloads

pdf

Published

29.06.2026

Issue

Section

Articles

Most read articles by the same author(s)

A.H. GYURJINYAN, CLASSIFICATION OF POROUS SMALL-GRAIN FILLERS ACCORDING TO THE SPECIFIC AREA OF GRANULES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
A.H. GYURJINYAN, ANALYSIS OF SOME PΡOPEΡTIES OF LIGHT CONCΡETES BY THE METHOD OF MATHEMATICAL STATISTICS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
H.G. GYURJINYAN, A.H. GYURJINYAN, DEPENDENCE OF PΡISMATIC STΡENGTH OF STΡUCTUΡAL TUFF-CONCΡETE ON THE CUBIC STΡENGTH AND TIME , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)

Similar Articles

A.H. GYURJINYAN, CLASSIFICATION OF POROUS SMALL-GRAIN FILLERS ACCORDING TO THE SPECIFIC AREA OF GRANULES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
V.A. BALAYAN, E.H. MASHAKARYAN, EXPERIMENTAL STUDIES ON DETERMINING THE RATIONAL RATIO OF FILLERS IN SELF-CURING CONCRETE PRODUCTS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
V.A. BALAYAN, S.A. KROYAN, INCREASING THE INTERREMOVAL PERIODS OF ASPHALT CONCRETE COATINGS DUE TO THE APPLICATION OF POLYMER-MINERAL ADDITIVES AND MODERN REGENERATION TECHNOLOGY , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
N.A. AVAGYAN, A.V. AMYAN, ELECTROCHEMICAL RECEIPT OF BISMUTH FROM PRODUCTION WASTES OF NON-FERROUS METALS , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)
M.M. SHAHUMYAN, G.P. HOVHANNISYAN, STUDYING THE ANTIOXIDANT ACTIVITY OF WATER EXTRACTS FROM VEGETABLE RAW MATERIALS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
ZH.S. HAKOBYAN, A TECHNOLOGY FOR OBTAINING LIQUID HYDROCARBON MIXTURE BY TREATMENT OF FUEL OIL AND BROWN COAL , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
S.A. KYUREGHYAN, N.K. MANASYAN, DEVELOPMENT OF A TECHNOLOGY FOR PRODUCING FIRE-PROTECTION AND FIRE-RESISTANT FABRICS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
A.H. KHACHATRYAN, A.H. BARSEGHYAN, M.Z. PETROSYAN, R.A. AVETISYAN, SYNTHESIS OF LOW-MELTING GLASS COMPOSITE MATERIALS IN BISMUTH-BORATE SYSTEMS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
G.A. VASILYAN, T.N. SAFARYAN, T.A. DEMIRCHYAN, A.S. AGHBALYAN, INVESTIGATION OF THE CASTING PROCESS OF DEFORMABLE ALUMINUM ALLOYS OF THE Al-Cu-TiC SYSTEM WITH A HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
A.G. GYURJINYAN, G.G. GYURJINYAN, APPLICATION OF LIGHTWEIGHT CONCRETE IN PRE-STRESSED REINFORCED CONCRETE STRUCTURES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)

1-10 of 97 Next

You may also start an advanced similarity search for this article.