CLASSIFICATION OF POROUS SMALL-GRAIN FILLERS ACCORDING TO THE SPECIFIC AREA OF GRANULES

Authors

A.H. GYURJINYAN National Polytechnic University of Armenia Author

Keywords:

fillers, magnitude modul, specific area, powders, investigation, granular structure, sand, tuff, density, strength

Abstract

The qualities and the granuler composition of the sands obtained from tuff are studied. The results are compared with the data of different natural and artifical porous fillers obtained by other authors. Based on the high percent of powders, it is proposed to classify all natural and artifical porous sands according to the specific area of the granules.

Downloads

pdf

Published

18.04.2026

Issue

Section

Articles

Most read articles by the same author(s)

A.H. GYURJINYAN, ANALYSIS OF SOME PΡOPEΡTIES OF LIGHT CONCΡETES BY THE METHOD OF MATHEMATICAL STATISTICS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
H.G. GYURJINYAN, A.H. GYURJINYAN, DEPENDENCE OF PΡISMATIC STΡENGTH OF STΡUCTUΡAL TUFF-CONCΡETE ON THE CUBIC STΡENGTH AND TIME , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
A.H. GYURJINYAN, PHYSICOMECHANICAL PROPERTIES OF LARGE FILLERS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)

Similar Articles

G.A. VASILYAN, T.N. SAFARYAN, T.A. DEMIRCHYAN, A.S. AGHBALYAN, INVESTIGATION OF THE CASTING PROCESS OF DEFORMABLE ALUMINUM ALLOYS OF THE Al-Cu-TiC SYSTEM WITH A HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
V.A. BALAYAN, E.H. MASHAKARYAN, EXPERIMENTAL STUDIES ON DETERMINING THE RATIONAL RATIO OF FILLERS IN SELF-CURING CONCRETE PRODUCTS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
P.L. YEREMYAN, PECULIARITIES OF OBTAINING HIGH-STRENGTH DEFORMABLE ALUMINUM-BASED ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
A.H. GYURJINYAN, PHYSICOMECHANICAL PROPERTIES OF LARGE FILLERS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
Т.А. ДЕМИРЧЯН, THE INFLUENCE OF THE PARTICLE SIZE AND THE QUANTITY BORON CARBIDE ON THE PROPERTIES OF STRUCTURAL ALLOYS OF THE AL-CU SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
S.G. AGHBALYAN, N.A. ORYAN, A.M. MARTIROSYAN, A.S. AGHBALYAN, KH.V. POGHOSYAN, TECHNOLOGIES FOR PRODUCING METAL-DIAMOND COMPOSITE MATERIALS USED IN STONE-PROCESSEING INDUSTRY AND THEIR PECULIARITIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
V.SH. GRIGORYAN, M.S. MAMYAN, KH.N. HAKOBYAN, B.S. BALASANYAN, THE POSSIBILITIES OF FORMING SPECIAL TECHNOLOGICAL ENVIRONMENTS WITH ULTRASONIC EMULSIFICATION FOR THE HEAT TREATMENT OF MACHINE PARTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
S.G. AGHBALYAN, G.A. VASILYAN, T.N. SAFARYAN, A.S. AGHBALYAN, T.A. DEMIRCHYAN, SUBSTANTIATION OF THE PRODUCTION PROCESS OF REINFORCED ALUMINUM DEFORMABLE ALLOYS WITH HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
S.A. KYUREGHYAN, A.G. ATOYAN, STUDYING THE STRENGTH OF ADHESIVE AND GLUE-THREAD JOINTS OF FOOTWEAR , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
A.JH. ASATRYAN, A.G. ATOYAN, COMPARATIVE ANALYSIS OF THE INVESTIGATION RESULTS OF THE STRENGTH OF ADHESIVE AND ADHESIVE JOINTS OF SHOES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)

1-10 of 216 Next

You may also start an advanced similarity search for this article.