THE IMPACT OF SECONDARY STRUCTURE OF ALUMINUM POWDER ALLOY ON ANTI-FRICTION PROPERTIES

Authors

S.G. AGHBALYAN National Polytechnic University of Armenia Author
V.G. VARDANYAN National Polytechnic University of Armenia Author

Keywords:

aluminum powder alloy, friction reducing agent, secondary structure film, phase, pressure, velocity, friction, wear

Abstract

The mechanism of formation of secondary structure at the friction of aluminum powder alloy of the composition 4% Cu + 1,8% Mg + 1,2% Cr + 4,5% MoS₂ + Alres is investigated. The investigation results show that the formation of the film is connected with both the chemical composition and phases of anti-friction materials, and with the external factors, especially pressure and speed.

Downloads

pdf

Published

22.07.2026

Issue

Section

Articles

Most read articles by the same author(s)

S.G. AGHBALYAN, A.A. PETROSYAN, PH.L. YEREMYAN, METHODS AND PECULIARITIES OF OBTAINING ALUMINIUM-BASED HIGH-STRENGTH DEFORMED ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
S.G. AGHBALYAN, N.G. MELIKSETYAN, H.H. YEZAKYAN, G.H. ASCHYAN, INVESTIGATING THE PROCESSES OF GRINDING AND MECHANOCHEMIEAL ACTIVATION OF SLAGS OF COPPER SMELTING PRODUCTIONS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
S.G. AGHBALYAN, G.A. VASILYAN, T.N. SAFARYAN, A.S. AGHBALYAN, T.A. DEMIRCHYAN, SUBSTANTIATION OF THE PRODUCTION PROCESS OF REINFORCED ALUMINUM DEFORMABLE ALLOYS WITH HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
S.G. AGHBALYAN, N.A. ORYAN, A.M. MARTIROSYAN, A.S. AGHBALYAN, KH.V. POGHOSYAN, TECHNOLOGIES FOR PRODUCING METAL-DIAMOND COMPOSITE MATERIALS USED IN STONE-PROCESSEING INDUSTRY AND THEIR PECULIARITIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
S.G. AGHBALYAN, A.M. HOVHANISYAN, L.G. GALSTYAN, H.A. KARAPETYAN, S.A. HARUTYUNYAN, INVESTIGATING THE CASTING PROCESSES OF HIGH-STRENGTH DEFORMABLE ALLOYS ALUMINUM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)

Similar Articles

E.G. ZAKARYAN, INVESTIGATING THE PROCESS OF OBTAINING FERROMOLYBDEN¬U-M FROM PRELIMINARY MECHANOACTIVATED TEGHUT MOLYBDENITE CONCENTRATE , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
S.G. AGHBALYAN, A.M. HOVHANISYAN, L.G. GALSTYAN, H.A. KARAPETYAN, S.A. HARUTYUNYAN, INVESTIGATING THE CASTING PROCESSES OF HIGH-STRENGTH DEFORMABLE ALLOYS ALUMINUM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
P.L. YEREMYAN, PECULIARITIES OF OBTAINING HIGH-STRENGTH DEFORMABLE ALUMINUM-BASED ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
S.G. AGHBALYAN, N.A. ORYAN, A.M. MARTIROSYAN, A.S. AGHBALYAN, KH.V. POGHOSYAN, TECHNOLOGIES FOR PRODUCING METAL-DIAMOND COMPOSITE MATERIALS USED IN STONE-PROCESSEING INDUSTRY AND THEIR PECULIARITIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
Т.А. ДЕМИРЧЯН, THE INFLUENCE OF THE PARTICLE SIZE AND THE QUANTITY BORON CARBIDE ON THE PROPERTIES OF STRUCTURAL ALLOYS OF THE AL-CU SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
A.A. ALAYAN, M.H. GHAZARYAN, DETERMINING THE RECRYSTALLIZATION DEGREE OF ALUMINUM FOIL OF THE TRADEMARK 3003 BY X-RAY STRUCTURAL ANALYSIS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
G.A. VASILYAN, T.N. SAFARYAN, T.A. DEMIRCHYAN, A.S. AGHBALYAN, INVESTIGATION OF THE CASTING PROCESS OF DEFORMABLE ALUMINUM ALLOYS OF THE Al-Cu-TiC SYSTEM WITH A HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
A.R. SARGSYAN, OPERATING CONDITIONS OF CONTACT WELDING ELECTRODES, THE USED ALLOYS, THEIR STRUCTURE AND CHARACTERISTICS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2016)
H.S. PETROSYAN, V.S. GHUKASYAN, K.M. ARSHAKYAN, COMPARISON OF THE LIQUID PHASE IN REINFORCED COMPOSITE MATERIALS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
KH.V. POGHOSYAN, THE STRUCTURE AND PROPERTIES OF DIAMOND POWDERS AND LIGAMENTS USED AT STONE PROCESSING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)

1-10 of 240 Next

You may also start an advanced similarity search for this article.