TOOL-ELECTRODE FEED AT SINGLE SPARK ELECTRO- DISCHARGE MACHINING

Authors

G.H. HAKOBYAN National Polytechnic University of Armenia Author
M.G. HAKOBYAN National Polytechnic University of Armenia Author

Keywords:

electro-discharge machining, single sparks, micrometer screw, tool-electrode, electrode work piece, supply, generator

Abstract

The features of electro discharge machining (EDM), the meaning and requirements of the tool-electrode supply mechanism are analyzed. The implementation of tool-electrode supply at single spark EDM is considered. A similar mechanism project is proposed, its structure and working principles are analyzed.

Downloads

pdf

Published

22.07.2026

Issue

Section

Articles

Most read articles by the same author(s)

M.G. HAKOBYAN, G.H. HAKOBYAN, THE INFLUENCE OF THE DIELECTRIC LIQUID TYPE ON THE SURFACE HARDNESS OF ELECTRICAL DISCHARGE-MACHINED STEEL 40KH (40Х) , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
G.H. HAKOBYAN, A.G. QAMALYAN, Q.A. AVETISYAN, DEVELOPMENT OF A MICROPROCESSOR SYSTEM FOR CONTROLLING A TRACKED MOBILE ROBOT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
M.G. HAKOBYAN, G.H. HAKOBYAN, THE POSSIBILITY OF USING ECOLOGICALLY FRIENDLY DIELECTRICS FOR ELECTRICAL DISCHARGE MACHINING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
M.G. HAKOBYAN, G.H. HAKOBYAN, THE REVIEW OF DIELECTRIC MEDIUMS FOR ELECTRICAL DISCHARGE MACHINING (Gyumri) , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
M.G. HAKOBYAN, A.M. HAKOBYAN, INVESTIGATING THE ELECTRICAL PROPERTIES OF EMULSIONS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
M.G. HAKOBYAN, A.M. HAKOBYAN, THR BEHAVIOUR OF EMULSION DIELECTRICS AT ULTRASONIC VIBRATIONS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)
M.G. HAKOBYAN, G.H. HAKOBYAN, AN EXPERIMENTAL EDM SETUP FOR WORKING IN DIFFERENT ENVIROMENTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)

Similar Articles

M.G. HAKOBYAN, G.H. HAKOBYAN, THE POSSIBILITY OF USING ECOLOGICALLY FRIENDLY DIELECTRICS FOR ELECTRICAL DISCHARGE MACHINING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
M.G. HAKOBYAN, G.H. HAKOBYAN, THE REVIEW OF DIELECTRIC MEDIUMS FOR ELECTRICAL DISCHARGE MACHINING (Gyumri) , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
M.G. HAKOBYAN, G.H. HAKOBYAN, THE INFLUENCE OF THE DIELECTRIC LIQUID TYPE ON THE SURFACE HARDNESS OF ELECTRICAL DISCHARGE-MACHINED STEEL 40KH (40Х) , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
E.V. PETROSYAN, V.G. BARSEGHYAN, E.K. BZNUNI, THE ROLE OF ARTIFICIAL INTELLIGENCE IN OPTIMIZING LOGISTICS AND SUPPLY CHAIN MANAGEMENT , Proceedings of Annual Conferences of NPUA: Vol. 2 (2025)
L.H. MUTAFYAN, R.E. AVAGYAN, THE IMPACT OF THE CUTTING CONDITIONS ON THE CUTTING TOOL WEAR AT TREATING HARD-PROCESSED MATERIALS AT INTERRUPTED CUTTING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
R.M. YOLCHYAN, G.V. GOULAKYAN, THE PERSPECTIVE OF APPLYING DRONE SYSTEMS IN THE PROBLEMS OF DIGITALISATION OF INTENSIVE GARDENS IN RA , Proceedings of Annual Conferences of NPUA: Vol. 2 (2025)
M.G. HAKOBYAN, G.H. HAKOBYAN, AN EXPERIMENTAL EDM SETUP FOR WORKING IN DIFFERENT ENVIROMENTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
A.A. GEVORGYAN, R.J. MURADYAN, V.S. SARGSYAN, THE ROLE OF SMALL MODULAR REACTORS IN ARMENIA'S LOW-CARBON DEVELOPMENT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2024)
V.E. AVETISYAN, AN INNOVATIVE APPROACH IN THE SPHERE OF TELECOMMUNICATION ON THE EXAMPLE OF THE RUSSIAN FEDERATION , Proceedings of Annual Conferences of NPUA: Vol. 1 (2018)
A.R. HOVHANNISYAN, A.R. KOSTANDIAN, N.K. MANASYAN, CIRCULAR ECONOMY IN THE CONTEXT OF INVESTMENT OF GREEN TECHNOLOGIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2025)

1-10 of 252 Next

You may also start an advanced similarity search for this article.