IMPROVING THE OPERATION CHARACTERISTICS AT THIN-BLADЕ PROCESSING WITH MULTI-TOOTH CORUNDUM MILLERS

Authors

H.S. MANUKYAN National Polytechnic University of Armenia Author
A.M. ARZUMANYAN National Polytechnic University of Armenia Author

Keywords:

multi-tooth cutter, corundum, temperature, non-ferrous metal alloys

Abstract

The processes of thin-blade processing of non-ferrous metals and alloys, in particular, the improvement of the operation characteristics of cutting tools, and thermodynamic energy generated by the cutting zone using both traditional and computer programs and modern modeling methods are investigated.

Downloads

pdf

Published

06.04.2026

Issue

Section

Articles

Most read articles by the same author(s)

A.M. HOVHANNISYAN, H.S. MANUKYAN, DISTRIBUTION OF VALUABLE METALS IN FLOTATION WASTES OF THE KAJARAN CONCENTRATOR AND PROSPECTS OF THEIR EXTRACTION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
A.M. ARZUMANYAN, T.A. MIRVELYAN, CALCULATION OF CUTTING STRENGTH AT PROCESSING OF ALLOYS FROM NON-FERROUS METALS BY CORUNDUM CUTTING PLATES WITH SQUARE-CUTTING CUTTING LOOP , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
A.M. ARZUMANYAN, H.S. MANUKYAN, S.H. HAKOBYAN, T.A. MIRVELYAN, CUTTERS AND CUTTER HEADS FOR THIN BLADE PROCESSING OF NON-FERROUS METALS AND ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)

Similar Articles

KH.V. POGHOSYAN, DIAMOND-METAL COMPOSITIONS USED IN STONE PROCESSING AND THEIR PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
R.R. VARDANYAN , M.G. TRAVAJYAN, A METHOD FOR INVESTIGATING THE CHARACTERISTICS OF PHOTOELECTRIC CONVERTERS BY TEMPERATURE MEASUREMENTS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2019)
M.E. SASUNTSYAN, V.H. MARTIROSYAN, E.G. ZAKARYAN, EXPERIMENTAL INVESTIGATIONS ON OBTAINING IRON-SILICON ALLOYS (LIGATURE) FROM PRODUCTION WASTES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
S.V. MELKUMYAN, K.J. MIRZABEKYAN, OPERATIONAL FEATURES OF USING THERMOCOUPLES IN NUCLEAR POWER INDUSTRY , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
S.A. KYUREGHYAN, A.G. ATOYAN, STUDYING THE STRENGTH OF ADHESIVE AND GLUE-THREAD JOINTS OF FOOTWEAR , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
J.A. TADEVOSYAN , SOME DEBT PROBLEMS OF THE GOVERNMENT OF REPUBLIC OF ARMENIA , Proceedings of Annual Conferences of NPUA: Vol. 1 (2024)
S.A. AVUSHYAN, DETECTING THE SUPPLY VOLTAGE DEVIATIONS IN TRANSMITTER-RECEIVER NODES OF INEGRATED CIRCUITS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)
Z.M. AVETISYAN, AN AUTOMATED SYSTEM FOR MEASURING THE METASTABILITY PARAMETERS AND CALCULATING THE MEAN TIME BETWEEN THE FAILURES IN SYNCHRONIZERS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2019)
T. A. VARDAPETYAN, A.A. GEVORGYAN, AN AUTONOMOUS ENERGY MICROGRID BASED ON SOLAR ENERGY AND HYDROGEN , Proceedings of Annual Conferences of NPUA: Vol. 1 (2024)
M.G. HAKOBYAN, A.M. HAKOBYAN, INVESTIGATING THE ELECTRICAL PROPERTIES OF EMULSIONS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)

Previous 41-50 of 140 Next

You may also start an advanced similarity search for this article.