INVESTIGATING THE TEMPERATURE IMPACT ON THE MECHANICAL PROPERTIES OF AMIDE YARNS

Authors

S.A. KYUREGHYAN National Polytechnic University of Armenia Author
N.K. MANASYAN National Polytechnic University of Armenia Author

Keywords:

thread, fabric, tensile load, linen weave, article, temperature effect

Abstract

The influence of high and low temperatures on the mechanical properties of fabrics made from amide yarns is studied. Mathematical models are obtained that allow to predict the mechanical properties of amide yarns, depending on the impact of temperature and its magnitude.

Downloads

pdf

Published

18.04.2026

Issue

Section

Articles

Most read articles by the same author(s)

S.A. KYUREGHYAN, A.G. ATOYAN, STUDYING THE STRENGTH OF ADHESIVE AND GLUE-THREAD JOINTS OF FOOTWEAR , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
N.K. MANASYAN, APPLICATION OF THE REGULAR COOLING MODE METHOD FOR ESTIMATING THE HEAT PROTECTION PROPERTIES OF CLOTHES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
S.A. KYUREGHYAN, L.A. VAHRADYAN, INVESTIGATING THE IMPACT OF HIGH-TEMPERATURE FIELDS ON THE INDIVIDUAL MEANS OF HUMAN PROTECTION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
S.A. KYUREGHYAN, A.J. ASATRYAN, A MATHEMATICAL MODEL OF THE FORMATION PROCESS OF THE FIBER FLOORING IN THE BUNKER WITH VIBRATING CONVEYORS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)

<< < 1 2

Similar Articles

A.R. HOVHANNISYAN, Z.A. MINASYAN, AN INSTALLATION FOR INVESTIGATING THE MIXED FABRIC STRETCHING DEFORMATION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
S.A. KYUREGHYAN, A.G. ATOYAN, STUDYING THE STRENGTH OF ADHESIVE AND GLUE-THREAD JOINTS OF FOOTWEAR , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
Z.A. MINASYAN, A.G. ATOYAN, STUDYING THE STRENGTH OF ADHESIVE AND GLUE-THREAD JOINTS OF FOOTWEAR , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
V.Z. MARUKHYAN, G.P. VARDANYAN, A.Z. KHACHATRYAN, ANALYSIS OF ELECTRICITY STORAGE METHODS AND STORAGE SYSTEMS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
P.A. ATABEKYAN, ESTIMATING THE ACCUΡACY OF DETEΡMINATING THE SEISMIC LOADS BY ACTING NOΡMS OF CONSTΡUCTION SEISMIC , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
V.A. SAHAKYAN, R.M. SOGHOMONYAN, HIGH PRECISION, VOLTAGE AND TEMPERATURE COMPENSATED CURRENT SOURCE WITH DIGITAL POSTCORRECTION FOR PROCESS VARIATIONS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
S.A. KYUREGHYAN, A.J. ASATRYAN, STUDYING THE SPECIFIC HEAT-RESISTANT THREADS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
A.V. AGHABEKYAN, G.Y. AYVAZYAN, L.A. HAKOBYAN, PROPERTIES OF ANNEALED BLACK SILICON , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
S.S. MARTIROSYAN, COMPREHENSIVE EVALUATION OF POLYGRAPHIC PRINTING FACTORS AND PRODUCTION OF HIGH QUALITY PRINTING , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
B.A. BALASANYAN, A METHOD FOR DETERMINING THE OPTIMAL DIMENSIONS OF A TWO-STAGE DRILL , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)

1-10 of 216 Next

You may also start an advanced similarity search for this article.