COMPREHENSIVE EVALUATION OF POLYGRAPHIC PRINTING FACTORS AND PRODUCTION OF HIGH QUALITY PRINTING

Authors

S.S. MARTIROSYAN National Polytechnic University of Armenia Author

Keywords:

temperature, heat distribution, stress distribution, deformation,3D modeling

Abstract

The properties of all the materials used in printing on the printing press with their complex structure have been discussed. The geometry of the materials used has been designed, the edge conditions have been adopted. Contact problem solving methods were used to determine the normal force parameter of the printing process, normal pressure, and the ANSYS software package was used to investigate the static and dynamic load modes in the print touch zone.

Downloads

pdf

Published

23.03.2026

Issue

Section

Articles

Most read articles by the same author(s)

Similar Articles

A.H. DAVTYAN, COMPUTER SIMULATION OF DRAWING A RECTANGULAR SECTION SAMPLE IN A WEDGE-SHAPED DIE AT DIFFERENT ANGLES OF INCLINATION OF THE WEDGE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
G.H. ASCHYAN, T.Sh. TADEVOSYAN, DEVELOPING A TECHNOLOGY FOR OBTAINING ASBESTOS-FREE BRAKE PADS WITH REQUIRED FUNCTIONAL PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
V.G. MUSAYELYAN, V.G. MUSAYELYAN, INVESTIGATING THE DEFORMATION PROCESS OF A THIN-WALL¬E¬D GRIDER OF A CLOSED PROFILE AT A FRONTAL COLLISION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
A.R. KHACHATRYAN, A.S. SARGSYAN, INVESTIGATING THE IMPACT OF MECHANICAL DEFORMATIONS ON THE FIELD DISTRIBUTION IN THE ANTENNA APPERTURE FOR THE ROT-54/2.6 RADIO TELESCOPE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2018)
G.L. PETROSYAN, A.H. DAVTYAN, INVESTIGATING THE DRAWING PROCESS OF A RECTANGULAR SECTION SINTERED SAMPLE IN A WEDGE-SHAPED DIE , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
S.G. AGHBALYAN, A.M. HOVHANISYAN, L.G. GALSTYAN, H.A. KARAPETYAN, S.A. HARUTYUNYAN, INVESTIGATING THE CASTING PROCESSES OF HIGH-STRENGTH DEFORMABLE ALLOYS ALUMINUM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
L.A. MANUKYAN, A.A. GHAZARYAN, G.H. GHAZARYAN, SELECTION OF SENSORS FOR STRESS REGISTRATION AT THREE-DIMENSIONAL MODELING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
L.S. HOVHANNISYAN, N.R. HARUTYUNYAN, A.G. SARGSYAN, PROBLEMS OF USING GROUND HEAT PUMPS IN AUTONOMOUS HEAT SUPPLY SYSTEMS IN YEREVAN , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
A.M. SEDRAKYAN, V.G. MARGARYAN, THE PHYSICAL PARAMETER CHARACTERIZING THE HEAT FLOW AS A FACTOR FOR CREATING THE ENVIRONMENT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
N.K. MANASYAN, S.M. HOVHANNISYAN, ASSESSING THE HEAT PROTECTION PROPERTIES OF CLOTHING IN THE TRANSITIONAL PERIOD OF THE YEAR , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)

1-10 of 185 Next

You may also start an advanced similarity search for this article.