INVESTIGATING THE IMPACT OF ALLOYING ELEMENTS ON THE HOT-SHORTNESS OF COPPER ALLOYS

Authors

H.A. KARAPETYAN National Polytechnic University of Armenia Author
P.L. YEREMYAN National Polytechnic University of Armenia Author
H.DZ. GALSTYAN National Polytechnic University of Armenia Author

Keywords:

alloy, hot shortness, crack, crack resistance, shrinkage, alloying elements

Abstract

The results of experimental studies of the effect of alloying elements on the hot-shortness of copper alloys are introduced. The maximum quantity of alloying elements amounts to 1%. The rational limits of the dopant concentrations influence the hot-shortness of copper alloys most effectively.

Downloads

pdf

Published

22.07.2026

Issue

Section

Articles

Most read articles by the same author(s)

P.L. YEREMYAN, PECULIARITIES OF OBTAINING HIGH-STRENGTH DEFORMABLE ALUMINUM-BASED ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
G.S. OVSEPYAN, H.A. KARAPETYAN, G.E. POGHOSYAN, K.S. SAMSONYAN, G.A. KARAPETYAN, A METHOD FOR INCREASING THE QUALITY OF HARD-ALLOYED DRILLING TOOLS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
S.G. AGHBALYAN, A.M. HOVHANISYAN, L.G. GALSTYAN, H.A. KARAPETYAN, S.A. HARUTYUNYAN, INVESTIGATING THE CASTING PROCESSES OF HIGH-STRENGTH DEFORMABLE ALLOYS ALUMINUM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)

Similar Articles

S.G. AGHBALYAN, A.M. HOVHANISYAN, L.G. GALSTYAN, H.A. KARAPETYAN, S.A. HARUTYUNYAN, INVESTIGATING THE CASTING PROCESSES OF HIGH-STRENGTH DEFORMABLE ALLOYS ALUMINUM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
KH.V. POGHOSYAN, DIAMOND-METAL COMPOSITIONS USED IN STONE PROCESSING AND THEIR PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
S.G. AGHBALYAN, A.A. PETROSYAN, PH.L. YEREMYAN, METHODS AND PECULIARITIES OF OBTAINING ALUMINIUM-BASED HIGH-STRENGTH DEFORMED ALLOYS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
H.S. CHIBUKHCHYAN, P.YU. GASPARYAN, RESEARCH OF IMPROVEMENT OF MECHANICAL PROPERTIES OF THIN-WALLED PARTS USED IN AVIATION TECHNOLOGY , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
A.R. SARKISYAN, PHYSICO-MECHANICAL PROPERTIES OF DISPERSELY-HARDENING AND STRENGTHENING LAYERED POWDER COMPOSITE MATERIALS BASED ON COPPER , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
Т.А. ДЕМИРЧЯН, THE INFLUENCE OF THE PARTICLE SIZE AND THE QUANTITY BORON CARBIDE ON THE PROPERTIES OF STRUCTURAL ALLOYS OF THE AL-CU SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2024)
G.S. OVSEPYAN, H.A. KARAPETYAN, G.E. POGHOSYAN, K.S. SAMSONYAN, G.A. KARAPETYAN, A METHOD FOR INCREASING THE QUALITY OF HARD-ALLOYED DRILLING TOOLS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
A.R. SARGSYAN, OPERATING CONDITIONS OF CONTACT WELDING ELECTRODES, THE USED ALLOYS, THEIR STRUCTURE AND CHARACTERISTICS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2016)
S.G. AGHBALYAN, G.A. VASILYAN, T.N. SAFARYAN, A.S. AGHBALYAN, T.A. DEMIRCHYAN, SUBSTANTIATION OF THE PRODUCTION PROCESS OF REINFORCED ALUMINUM DEFORMABLE ALLOYS WITH HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
S.H. BADALYAN, M.Z. PETROSYAN, STUDYING THE INFLUENCE OF A SILICON- ORGANIC COMPOUND ON THE CHEMICAL RESISTANCE OF GLASS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)

1-10 of 149 Next

You may also start an advanced similarity search for this article.