INVESTIGATING THE CUTTING PROCESS WITH A MULTISTEPPED BLADE CUTTER THROUGH THREE-DIMENSIONAL MODELING

D.G. YURMUZYAN; G.A. SIMONYAN

INVESTIGATING THE CUTTING PROCESS WITH A MULTISTEPPED BLADE CUTTER THROUGH THREE-DIMENSIONAL MODELING

Authors

D.G. YURMUZYAN National Polytechnic University of Armenia Author
G.A. SIMONYAN National Polytechnic University of Armenia Author

Keywords:

multistepped cutter, three-dimensional modeling, cutting process, experimental stand, vibration, cutting zone temperature, metal cutting

Abstract

The research technique of metal cutting with a multistepped cutter through three-dimensional modeling is considered. With the help of the software package 3D Deform methods of modeling of the cutting process are selected.

Downloads

pdf

Published

29.06.2026

Issue

Vol. 2 (2017)

Section

Articles

Most read articles by the same author(s)

B.A. BALASANYAN, H.A. HOVHANNISYAN, A.R. KARAPETYAN, D.G. YURMUZYAN, DEVELOPTNG THE TECHNICAL TASK OF A SMALL-DIMENSION DESKTOP MANIPULATOR BY USING ADDITIVE TECHNOLOGIES AND RAPID PROTOTYPING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)

Similar Articles

H.S. CHIBUKHCHYAN, A.B. BALASANYAN, A.L. ARSHAKYAN, B.A. BALASANYAN, IMPROVING THE STRENGTH OF THIN-WALLED MACHINE PARTS USING THE TECHNOLOGY OF TWO-WAY ULTRASONIC HARDENING , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
G.S. YESAFYAN, G.V. MUSAYELYAN, INVESTIGATIING THE CAR SUSPENSION VIBRATION PROCESS IN THE MATLAB (SIMULINK) SOFTWARE ENVIRONMENT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
S.G. AGHBALYAN, G.A. VASILYAN, T.N. SAFARYAN, A.S. AGHBALYAN, T.A. DEMIRCHYAN, SUBSTANTIATION OF THE PRODUCTION PROCESS OF REINFORCED ALUMINUM DEFORMABLE ALLOYS WITH HIGH SPECIFIC STRENGTH , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
S.SH. BALASANYAN, H.M. GEVORGYAN, COMPARATIVE ANALYSIS OF THE MODELS OF THE ORE FLOTATION TECHNOLOGICAL PROCESS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)
G.H. KIRAKOSYAN, A.G. QAMALYAN, MODELING OF TRANSIENT CHARACTERISTICS OF STATIONARY DYNAMIC SYSTEMS IN THE MATLAB ENVIRONMENT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
M.G. SARGSYAN, STUDYING THE DEPTH OF THE ACTIVE ZONE OF SOIL COMPACTION BY ROAD PNEUMATIC ROLLERS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
A.H. DAVTYAN, COMPUTER SIMULATION OF DRAWING A RECTANGULAR SECTION SAMPLE IN A WEDGE-SHAPED DIE AT DIFFERENT ANGLES OF INCLINATION OF THE WEDGE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
S.A. AVUSHYAN, DETECTING THE SUPPLY VOLTAGE DEVIATIONS IN TRANSMITTER-RECEIVER NODES OF INEGRATED CIRCUITS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)
A.KH. MKHITARYAN, A METHOD FOR NOISE REJECTION IN SPECIAL-PURPOSE INTEGRATED CIRCUITS, USING DECOUPLING CAPACITORS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2018)
H.S. NIKOGHOSYAN, S.L. HARUTYUNYAN, G.H. NIKOGHOSYAN, COHERENT NON-STATIONARY PHENOMENA IN THE MASSIVE OF SPHERICAL QUANTUM DOTS UNDER THE CONDITIONS OF STRONG DIMENSIONAL QUANTIZATION , Proceedings of Annual Conferences of NPUA: Vol. 1 (2019)

Previous 21-30 of 340 Next

You may also start an advanced similarity search for this article.

INVESTIGATING THE CUTTING PROCESS WITH A MULTISTEPPED BLADE CUTTER THROUGH THREE-DIMENSIONAL MODELING

Authors

Keywords:

Abstract

Downloads

Published

Issue

Section

Most read articles by the same author(s)

Similar Articles

edtor