DETERMINY THE PERIOD OF GUARANTEE MAINTENANCE OF FLOOR CARPETS

N.V. MUGHNETSYAN; M.A. SAHAKYAN; S.N. MKOYAN

DETERMINY THE PERIOD OF GUARANTEE MAINTENANCE OF FLOOR CARPETS

Authors

N.V. MUGHNETSYAN National Polytechnic University of Armenia Author
M.A. SAHAKYAN National Polytechnic University of Armenia Author
S.N. MKOYAN National Polytechnic University of Armenia Author

Keywords:

abrasion resistance, stitch-bonded, needlepunched, tufted, kinetics of wear, wear cycle lifetime

Abstract

The kinetics of various floor carpets is studied, the corresponding empirical formulae of the wear kinetics are obtained, the periods of the guarantee operation are defined.

Downloads

pdf

Published

29.06.2026

Issue

Vol. 2 (2017)

Section

Articles

Most read articles by the same author(s)

H.S. SARAFYAN, S.N. MKOYAN, MATHEMATICAL MODELING OF THE ADVERTISING BUDGET DETERMINATION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
M.A. SAHAKYAN, N.V. MUGHNETSYAN, E.M. BARSEGHYAN, THE INFLUENCE OF THE SPINNING TECHNOLOGICAL PROCESS PARAMETERS ON THE EFFICIENCY OF PRODUCTION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
H.S. SARAFYAN, S.N. MKOYAN, COMPLEX ESTIMATION OF EFFICIENCY OF THE INNOVATIVE ACTIVITY OF AN ENTERPRISE , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
S.N. MKOYAN, L.S. SARGSYAN, N.N. GEVORGYAN, COMPARATIVE ASSESSMENT OF THE INNOVATION POTENTIAL OF THE TEXTILE INDUSTRY ENTERPRISES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
N.V. MUGHNETSYAN, S.N. MKOYAN, A METHOD FOR COLLECTING AND ANALYZING THE TEXTILE PRODUCT QUALITY INDICATORS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
M.A. SAHAKYAN, L.P. YASAKOVA, A.R. MANUKYAN, EDUCATIONAL AND SPORTS MODERN APPROACHES APPLIED IN VOLLEYBALL , Proceedings of Annual Conferences of NPUA: Vol. 3 (2018)
H.S. SARAFYAN, S.N. MKOYAN, ANALYSES OF THE TECHNOLOGICAL PROCESS EFFICIENCY , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)

Similar Articles

A.R. HOVHANNISYAN, S.A. KYUREGHYAN, RESEARCH OF WEAR - RESISTANCE OF THREE-COMPONENT MIXED FABRICS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
A.M. ARZUMANYAN, T.A. MIRVELYAN, CALCULATION OF CUTTING STRENGTH AT PROCESSING OF ALLOYS FROM NON-FERROUS METALS BY CORUNDUM CUTTING PLATES WITH SQUARE-CUTTING CUTTING LOOP , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
G.S. OVSEPYAN, H.A. KARAPETYAN, G.E. POGHOSYAN, K.S. SAMSONYAN, G.A. KARAPETYAN, A METHOD FOR INCREASING THE QUALITY OF HARD-ALLOYED DRILLING TOOLS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
S.G. AGBALYAN, G.N. MELISETYAN, INFLUENCE OF THE TEMPERATURE RISE AT ONE BRAKING ON THE WEAR-RESISTANCE OF FRICTION MATERIALS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
N.K. MANASYAN, RESEARCH OF WEAR RESISTANCE OF CURTAIN FABRICS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
H.K. MKRTCHYAN, B.S. BALASANYAN, A.B. BALASANYAN, H.A. HOVHANNISYAN, H.A. ISUNTS, A METHOD FOR MANUFACTURING AN ULTRASONIC DENTAL NOZZLE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
H.S. CHIBUKHCHYAN, P.YU. GASPARYAN, RESEARCH OF IMPROVEMENT OF MECHANICAL PROPERTIES OF THIN-WALLED PARTS USED IN AVIATION TECHNOLOGY , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
KH.V. POGHOSYAN, THE STRUCTURE AND PROPERTIES OF DIAMOND POWDERS AND LIGAMENTS USED AT STONE PROCESSING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
KH.V. POGHOSYAN, DIAMOND-METAL COMPOSITIONS USED IN STONE PROCESSING AND THEIR PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
L.H. MUTAFYAN, R.E. AVAGYAN, THE IMPACT OF THE CUTTING CONDITIONS ON THE CUTTING TOOL WEAR AT TREATING HARD-PROCESSED MATERIALS AT INTERRUPTED CUTTING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)

1-10 of 75 Next

You may also start an advanced similarity search for this article.

DETERMINY THE PERIOD OF GUARANTEE MAINTENANCE OF FLOOR CARPETS

Authors

Keywords:

Abstract

Downloads

Published

Issue

Section

Most read articles by the same author(s)

Similar Articles

edtor