BELLOWS INDUSTRIAL ROBOTS

Authors

F.A. PARIKYAN National Polytechnic University of Armenia Author
A.S. BABAYAN National Polytechnic University of Armenia Author
A.S. KHACHATRYAN National Polytechnic University of Armenia Author

Keywords:

industrial robot, bellows, pressure, output link

Abstract

The work is devoted to the study of the design principles of industrial robots bellows by manipulators using bellows as a drive, creating prerequisites for applying the results in the production of circuit boards, as well as for performing assembly and welding operations.

Downloads

pdf

Published

22.07.2026

Issue

Section

Articles

Most read articles by the same author(s)

B.S. BALASANYAN , A.B. BALASANYAN, F.H. PARIKYAN, A.S. BABAYAN, N.H. KHACHATRYAN, IMPROVING THE EFFICIENCY OF THE PROCESS OF ULTRASONIC BURNISHING BY APPLYING NEW SCHEMES OF ULTRASONIC VIBRATIONS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2016)
F.A. PARIKYAN, A.S. BABAYAN, INVESTIGATING THE PROCESS OF ROLLING FLAT SURFACES WITH A ROTATING TOOL , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
K.R. AVETISYAN, A.S. KHACHATRYAN, AUTOMATION OF DEVELOPING MODELS FOR CASH FLOW FORECASTING AND ACTIVITY MANAGEMENT ASSESSMENT OF A COMMERCIAL BANK , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
F.A. PARIKYAN, A.S. BABAYAN, V.G. ASATRYAN, INVESTIGATING THE OPERATION OF THE INDUSTRIAL ROBOT AND DEVELOPING THE CONTROL SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)

Similar Articles

F.A. PARIKYAN, A.S. BABAYAN, V.G. ASATRYAN, INVESTIGATING THE OPERATION OF THE INDUSTRIAL ROBOT AND DEVELOPING THE CONTROL SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
A.T. ULIKYAN, S.A. ABGARYAN, GRAFICAL INTERFACE FOR INVESTIGATING THE CONTROL SYSTEM OF A TWO-WHEELED MOBILE ROBOT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)
P.S. MANUKYAN, A.M. HARUTYUNYAN, S.J. SARGSYAN, DAMPED OSCILLATION FREQUENCY CONVERTER FOR INDUCTION HEATING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2023)
R.K. APIKYAN, ELAPSED TIME COMPARISION OF THE LFSR PARALLEL AND SEQUENTIAL OUTPUT GENERATION , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)
S.S. MARTIROSYAN, INVESTIGATION AND ANALYSIS OF PRESSURE AND DEFORMATION IN THE PRINTING ZONE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
G.M. TRAVAJYAN, K.A. MELIQYAN, A METHOD FOR CONTROLLING THE EDGE DURATION OF THE OUTPUT SIGNAL OF THE TRANSMITTING NODE OF THE INPUT/OUTPUT ELEMENTS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2019)
R.A. ATABEKYAN, L.R. ATABEKYAN, M.R. SAHAKYAN, DEPENDENCE OF SEISMIC IMPACTS ON THE PRESSURE VALUE UNDER THE FOUNDATION , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
Z.G. KHANAMIRYAN, E.M. TERTERYAN, SIMULATION OF A ROBOT MANIPULATOR IN THE LABVIEW SOFTWARE ENVIRONMENT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2024)
A.G. SUKIASYAN, A.B. ASLANYAN, T.A. SUKIASYAN, ORGANIZATIONAL ISSUES OF FORMING REGIONAL INDUSTRIAL CLUSTERS IN SHIRAK MARZ , Proceedings of Annual Conferences of NPUA: Vol. 1 (2019)
K.A. MELIKYAN, INVESTIGATING THE MEANS FOR THE PERFORMANCE INCREASE METHODS IN THE INPUT/OUTPUT UNITS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)

1-10 of 104 Next

You may also start an advanced similarity search for this article.