TOOL-ELECTRODE FEED AT SINGLE SPARK ELECTRO- DISCHARGE MACHINING

Authors

G.H. HAKOBYAN National Polytechnic University of Armenia Author
M.G. HAKOBYAN National Polytechnic University of Armenia Author

Keywords:

electro-discharge machining, single sparks, micrometer screw, tool-electrode, electrode work piece, supply, generator

Abstract

The features of electro discharge machining (EDM), the meaning and requirements of the tool-electrode supply mechanism are analyzed. The implementation of tool-electrode supply at single spark EDM is considered. A similar mechanism project is proposed, its structure and working principles are analyzed.

Downloads

pdf

Published

22.07.2026

Issue

Section

Articles

Most read articles by the same author(s)

M.G. HAKOBYAN, G.H. HAKOBYAN, THE INFLUENCE OF THE DIELECTRIC LIQUID TYPE ON THE SURFACE HARDNESS OF ELECTRICAL DISCHARGE-MACHINED STEEL 40KH (40Х) , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
G.H. HAKOBYAN, A.G. QAMALYAN, Q.A. AVETISYAN, DEVELOPMENT OF A MICROPROCESSOR SYSTEM FOR CONTROLLING A TRACKED MOBILE ROBOT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
M.G. HAKOBYAN, G.H. HAKOBYAN, THE POSSIBILITY OF USING ECOLOGICALLY FRIENDLY DIELECTRICS FOR ELECTRICAL DISCHARGE MACHINING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
M.G. HAKOBYAN, A.M. HAKOBYAN, INVESTIGATING THE ELECTRICAL PROPERTIES OF EMULSIONS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
M.G. HAKOBYAN, G.H. HAKOBYAN, THE REVIEW OF DIELECTRIC MEDIUMS FOR ELECTRICAL DISCHARGE MACHINING (Gyumri) , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
M.G. HAKOBYAN, A.M. HAKOBYAN, THR BEHAVIOUR OF EMULSION DIELECTRICS AT ULTRASONIC VIBRATIONS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)
M.G. HAKOBYAN, G.H. HAKOBYAN, AN EXPERIMENTAL EDM SETUP FOR WORKING IN DIFFERENT ENVIROMENTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)

Similar Articles

A.S. SAHAKYAN, SELF-DECISION POWER COLLAPSING PROTECTION SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 1 (2016)
S.A. AVUSHYAN, DETECTING THE SUPPLY VOLTAGE DEVIATIONS IN TRANSMITTER-RECEIVER NODES OF INEGRATED CIRCUITS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)
A.M. ZADOYAN, T.J. SHIRVANYAN NAMAGARDI, N.S. KARAPETYAN, STUDY OF ALLOWING ABILITY OF PHOTOLITHOGRAPHY IN THE TECHNOLOGY OF MANUFACTURING A MULTI-ELECTRODE PROBE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)
V.Z. MARUKHYAN, A.L. ADYAN, DEVELOPING AN ALGORITM FOR THE POWER PLANT POWER LIMITATION DUE TO THE OPERATION OF THE TECHNICAL WATER SUPPLY SYSTEM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
KH.V. POGHOSYAN, THE STRUCTURE AND PROPERTIES OF DIAMOND POWDERS AND LIGAMENTS USED AT STONE PROCESSING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
O.V. MANUKYAN, SOME METHODS OF ORGANIZING THE PLANNING OF THE WORK OF ROBOT GROUPS IN CLOUD ROBOTIC SYSTEMS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2019)
H.N. KOCHARYAN, A.V. AMYAN, N.R. HOVHANNISYAN, OBTAINING A SHUNT OF A ZINC ELECTRODE WITH A GALVANIC ZINC UPPER LAYER , Proceedings of Annual Conferences of NPUA: Vol. 2 (2016)
M.T. NAJARYAN, APPLYING MODERN TEACHING TECHNOLOGIES AND PROBLEMS OF ORGANIZING THE STUDENT’S INDIVIDUAL WORK , Proceedings of Annual Conferences of NPUA: Vol. 2 (2022)
E.N. MANUKYAN, O.V. MANUKYAN, G.G. KIRAKOSYAN, SOME PRINCIPLES OF PLANNING THE GROUP WORK OF ROBOTS IN CLOUD ROBOTIC SYSTEMS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2018)
R.A. SIMONYAN, AN ONLINE PROGRAMMING TOOL FOR THE PHYSICAL DESIGN OF MICROCIRCUITS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2015)

Previous 21-30 of 252 Next

You may also start an advanced similarity search for this article.