THE CAR BODY INTERIOR STIFFNESS EVALUATION  IN DIFFERENT CASES OF LOADING

N.A. BAZIKYAN; V.G. MUSAYELYAN

THE CAR BODY INTERIOR STIFFNESS EVALUATION IN DIFFERENT CASES OF LOADING

Authors

N.A. BAZIKYAN National Polytechnic University of Armenia Author
V.G. MUSAYELYAN National Polytechnic University of Armenia Author

Keywords:

car body, body interior, finite element method, automobile crash process

Abstract

A calculation model for an interior of a car body is developed by the finite element method. An analysis of the nonlinear deformation process for the interior in different loading cases is carried out.

Downloads

pdf

Published

22.07.2026

Issue

Vol. 2 (2016)

Section

Articles

Most read articles by the same author(s)

G.V. MUSAYELYAN, V.G. MUSAYELYAN, DEVELOPING CALCULATION MODELS FOR THE AUTOMOBILE LOAD-CARRYING SYSTEMS BY THE FINITE ELEMENT METHOD , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
V.G. MUSAYELYAN, V.G. MUSAYELYAN, INVESTIGATING THE DEFORMATION PROCESS OF A THIN-WALL¬E¬D GRIDER OF A CLOSED PROFILE AT A FRONTAL COLLISION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
G.V. MUSAYELYAN, V.G. MUSAYELYAN, G.S. YESAFYAN, PECUALIARITIES OF APPLYNG ADAPTIVE SUSPENSIONS IN CARS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)

Similar Articles

G.V. MUSAYELYAN, V.G. MUSAYELYAN, DEVELOPING CALCULATION MODELS FOR THE AUTOMOBILE LOAD-CARRYING SYSTEMS BY THE FINITE ELEMENT METHOD , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
V.G. MUSAYELYAN, V.G. MUSAYELYAN, INVESTIGATING THE DEFORMATION PROCESS OF A THIN-WALL¬E¬D GRIDER OF A CLOSED PROFILE AT A FRONTAL COLLISION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
G.V. MUSAYELYAN, INVESTIGATING THE DEFORMATION PROCESS OF THIN-WALLED GRIDER OF A CLOSED PROFILE AT A FRONTAL COLLISION , Proceedings of Annual Conferences of NPUA: Vol. 2 (2016)
G.V. MUSAYELYAN, V.G. MUSAYELYAN, THE DEVELOPMENT OF CALCULATION MODELS OF LOAD-LOADING SYSTEMS OF PASSENGER VEHICLES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2024)
H.S. SUKIASYAN, OPTIMIZATION OF MATRICES GENERATED BY TRIANGULATIONS AT NUMERICAL CALCULATION OF THE ELECTROMAGNETIC FIELD , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
N.L. GURJI, D.V. KAZAKOV, NONLINEAR STATIC ANALYSIS IN CONTROL OF THE RELIABILITY PARAMETERS OF A FREIGHT CAR , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
G.S. YESAFYAN, MODELING AND RESEARCH OF THE SUSPENSION OF A FOUR-WHEEL CAR , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
A.A. MARGARYAN, S.V. VERLINSKI, STUDYING THE STRAIN-STRESS STATE IN THE CONTACT OF PRINTING CYLINDERS BY THE METHOD OF FINITE ELEMENTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
Z.V. BAGHDASARYAN , CONCEPTUAL APPROACHES TO THE ARMENIAN INTERIOR STYLE IN RURAL AND URBAN ENVIRONMENTS AND ITS SIMILARITY TO THE COUNTRY STYLE , Proceedings of Annual Conferences of NPUA: Vol. 2 (2025)
G.S. YESAFYAN, G.V. MUSAYELYAN, INVESTIGATIING THE CAR SUSPENSION VIBRATION PROCESS IN THE MATLAB (SIMULINK) SOFTWARE ENVIRONMENT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)

1-10 of 500 Next

You may also start an advanced similarity search for this article.