OBTAINING IMAGES IN CMYK COLOR MODEL WITH GRIDS OF DIFFERENT LINEARITY USING THE SILK PRINTING METHOD

Authors

A.A. MARGARYAN National Polytechnic University of Armenia Author
N.S. TOVMASYAN National Polytechnic University of Armenia Author

Keywords:

silk printing, linearity of grids, raster, CMYK color model

Abstract

The importance of obtaining a raster by silk printing is shown. The main parameters of the obtained paint layer are separated. The relationship between the main parameters of the printable ink drop and silk is obtained. By experiments, printing is done by CMYK color model with grids of different linearity and a comparison is made between the obtained images.

Downloads

pdf

Published

13.03.2026

Issue

Section

Articles

Most read articles by the same author(s)

Similar Articles

A.A. MARGARYAN, DEPENDENCE OF THE INK LAYER OBTAINED BY THE METHOD OF SCREEN PRINTING ON THE LINEARITY OF THE MESH , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
V.K. DALLAKYAN , R.R. VARDANYAN , A.G. BABAYAN, A METHOD FOR ASSESSING THE HELIOSTAT PARAMETERS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2017)
S.S. MARTIROSYAN, INVESTIGATION AND ANALYSIS OF PRESSURE AND DEFORMATION IN THE PRINTING ZONE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
S.SH. BALASANYAN, V.SH. BALASANYAN, H.M. GEVORGYAN, A COMPUTER STRATIFIED MODEL FOR ASSESSMENT AND ANALYSIS OF RELIABILITY OF STRUCTURALLY COMPLEX SYSTEMS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2019)
H.S. SUKIASYAN, TRANSITION FROM A DIFFERENTIAL EQUATION TO FINITE SYSTEM OF EQUATIONS WITH A FINITE NUMBER OF UNKNOWNS USING THE EXAMPLE OF TWO-DIMENSIONAL ELECTROMAGNETIC FIELD , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)
K.A. TUMANYAN, H.A. GALOYAN, THE PARAMETERIZATION PROBLEMS IN DEZIGN PROJECTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2025)
S.S. MARTIROSYAN, COMPREHENSIVE EVALUATION OF POLYGRAPHIC PRINTING FACTORS AND PRODUCTION OF HIGH QUALITY PRINTING , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
G.S. YESAYAN, RESEARCH OF A BICYCLE SUSPENSION MODEL OF A CAR IN THE MATLAB (SIMULINK) SOFTWARE ENVIRONMENT , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
A.A. MARGARYAN, S.V. VERLINSKI, STUDYING THE STRAIN-STRESS STATE IN THE CONTACT OF PRINTING CYLINDERS BY THE METHOD OF FINITE ELEMENTS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
S.SH. BALASANYAN, H.M. GEVORGYAN, COMPARATIVE ANALYSIS OF THE MODELS OF THE ORE FLOTATION TECHNOLOGICAL PROCESS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2020)

1-10 of 132 Next

You may also start an advanced similarity search for this article.