A SPIRAL DRILL WITH A MULTI-STAGE BLADE

Authors

B.A. BALASANYAN National Polytechnic University of Armenia Author
H.A. HOVHANNISYAN National Polytechnic University of Armenia Author
A.L. ARSHAKYAN National Polytechnic University of Armenia Author
A.B. BALASANYAN National Polytechnic University of Armenia Author

Keywords:

spiral drill, cutting stage, blade, chip separation grooves, edges of the main blades

Abstract

A new geometry of a spiral drill with a multi-stage blade, which can be used at drilling holes in hard-to-process materials in various branches of mechanical engineering, as well as in medicine for high-speed processing of open and closed holes in bone tissues is presented.

Downloads

pdf

Published

06.04.2026

Issue

Section

Articles

Most read articles by the same author(s)

A.L. ARSHAKYAN, B.A. BALASANYAN, H.S. CHIBUKHCHYAN, B.S. BALASANYAN, PRINCIPLES OF DETERMINATION OF OPTIMUM PARAMETERS FOR FORMING A REGULAR MICRORELIEF , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
A.L. ARSHAKYAN, S.K. JEGIAZARYAN, A.B. BALASANYAN, V.SH. GRIGORYAN, TECHNOLOGY FOR FORMING A REGULAR PLATE-SIZED MICRORELIEF , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
B.A. BALASANYAN, H.A. HOVHANNISYAN, A.R. KARAPETYAN, D.G. YURMUZYAN, DEVELOPTNG THE TECHNICAL TASK OF A SMALL-DIMENSION DESKTOP MANIPULATOR BY USING ADDITIVE TECHNOLOGIES AND RAPID PROTOTYPING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
A.L. ARSHAKYAN, A.B. BALASANYAN, H.S. CHIBUKHCHYAN, B.A. BALASANYAN, V.SH. GRIGORYAN, COMPACT MAGNETOSTRICTIVE CONVERTER OF ULTRASONIC VIBRATIONS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
H.K. MKRTCHYAN, A.B. BALASANYAN, A.L. ARSHAKYAN, B.A. BALASANYAN, A SYSTEM FOR IRRIGATING MEDICINES OF AN AUTONOMOUS ULTRASONIC DENTAL DEVICE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
H.S. CHIBUKHCHYAN, A.B. BALASANYAN, A.L. ARSHAKYAN, B.A. BALASANYAN, IMPROVING THE STRENGTH OF THIN-WALLED MACHINE PARTS USING THE TECHNOLOGY OF TWO-WAY ULTRASONIC HARDENING , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
B.A. BALASANYAN, H.A. HOVHANNISYAN, A.B. BALASANYAN, A.L. ARSHAKYAN, A METHOD FOR MAKING A SPIRAL DRILL WITH A MULTI-STAGE BLADE , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
H.K. MKRTCHYAN, B.A. BALASANYAN, M.A. BALASANYAN, A MANUALLY ADJUSTABLE IRRIGATION SYSTEM OF MEDICINES OF AN AUTONOMOUS ULTRASOUND DENTAL APPARATUS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
B.A. BALASANYAN, A METHOD FOR DETERMINING THE OPTIMAL DIMENSIONS OF A TWO-STAGE DRILL , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
H.K. MKRTCHYAN, B.S. BALASANYAN, A.B. BALASANYAN, H.A. HOVHANNISYAN, H.A. ISUNTS, A METHOD FOR MANUFACTURING AN ULTRASONIC DENTAL NOZZLE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)

1 2 > >>

Similar Articles

B.A. BALASANYAN, H.A. HOVHANNISYAN, A.B. BALASANYAN, A.L. ARSHAKYAN, A METHOD FOR MAKING A SPIRAL DRILL WITH A MULTI-STAGE BLADE , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
B.A. BALASANYAN, A.L. ARSHAKYAN, S.H. HAKOBYAN, B.S. BALASANYAN, A PROGRAM FOR CALCULATING THE CUTTING DEPTHS OF THE STAGES OF A MULTI-STAGE DRILL FROM THE EQUALITY CONDITION OF THE PRODUCTS OF THEIR TORQUES AND AXIAL FORCES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2023)
H.A. ISUNTS, MODELING A NEW CONSTRUCTION OF A FIXTURE FOR SHARPENING THE CUTTING EDGES OF A TWIST DRILL , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
H.A. ISUNTS, B.S. BALASANYAN, A FIXTURE FOR THE CUTTING EDGE SHARPENING OF A TWIST DRILL WITH A MULTISTAGE BLADE , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
B.A. BALASANYAN, A METHOD FOR DETERMINING THE OPTIMAL DIMENSIONS OF A TWO-STAGE DRILL , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
A.M. ARZUMANYAN, T.A. MIRVELYAN, CALCULATION OF CUTTING STRENGTH AT PROCESSING OF ALLOYS FROM NON-FERROUS METALS BY CORUNDUM CUTTING PLATES WITH SQUARE-CUTTING CUTTING LOOP , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
H.B. BAGHDASARYAN , M.Y. HARUTYUNYAN, V.H. BAGHDASARYAN , IMPACT OF CUTTING MODES ON THE FORMATION OF TECHNOLOGICAL RESIDUAL STRESSES AT BLADE CUTTING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
L.H. MUTAFYAN, R.E. AVAGYAN, THE IMPACT OF THE CUTTING CONDITIONS ON THE CUTTING TOOL WEAR AT TREATING HARD-PROCESSED MATERIALS AT INTERRUPTED CUTTING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
D.G. YURMUZYAN, G.A. SIMONYAN, INVESTIGATING THE CUTTING PROCESS WITH A MULTISTEPPED BLADE CUTTER THROUGH THREE-DIMENSIONAL MODELING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
O.A. ZADOYAN, L.A. HARUTYUNYAN, A.M. ZADOYAN, STUDYING THE PRODUCTION OF GRAPHENE-BASED MDS (METAL-DIELETRIC-SEMICONDUCTOR) TRANSISTOR , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)

1-10 of 137 Next

You may also start an advanced similarity search for this article.