OPTIMAL CONSTRUCTION OF А WHELLED MACHINE FOR QUARRYING WALL STONE OF THE CORRECT FORM

S.S.. HARUTYUNYAN; J.A. ASATRYAN

OPTIMAL CONSTRUCTION OF А WHELLED MACHINE FOR QUARRYING WALL STONE OF THE CORRECT FORM

Authors

S.S.. HARUTYUNYAN National Polytechnic University of Armenia Author
J.A. ASATRYAN National Polytechnic University of Armenia Author

Keywords:

wall stone of the correct form, machine for quarrying, hydrostatic chassis, circular saw, cutting head

Abstract

The construction of wheeled machine for quarrying wall stone of the correct form is introduced. The most optimal solutions for manufacturing a machine by using the most up-to-date variant of hydraulic units is considered.

Downloads

pdf

Published

29.06.2026

Issue

Vol. 2 (2017)

Section

Articles

Most read articles by the same author(s)

J.A. ASATRYAN, WAYS FOR DEVELOPING MACHINES FOR QUARRYING STONE OF THE CORRECT FORM , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
J.A. ASATRYAN, S.S. HARUTYUNYAN, F.A. MSRYAN, A.V. BAGHDASARYAN , TECHNOLOGICAL OPPORTUNITIES FOR THE SECONDARY USE OF ABANDONED QUARRIES , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)

Similar Articles

T.S. AGHAMYAN, P.N. NERSISYAN, A NEW VERSION OF PREPARATORY AND CUTTING WORKS AT THE SHAHOUMIAN GOLD-POLYMETALLIC DEPOSIT , Proceedings of Annual Conferences of NPUA: Vol. 2 (2019)
KH.V. POGHOSYAN, DIAMOND-METAL COMPOSITIONS USED IN STONE PROCESSING AND THEIR PROPERTIES , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
A.L. ARSHAKYAN, N.G. KHACHATRYAN, H.S. CHIBUKHCHYAN, A.B. BALASANYAN, SOME POSSIBILITES OF PLASTIC DEFORMATION OF THE MACHINE PART SURFACES BY SUPERPOSITIONING THE INDENTER WITH ULTRASOUND OSCILLATIONS ALONG THE RESULTANT FORCE PROCESSING , Proceedings of Annual Conferences of NPUA: Vol. 2 (2017)
H.S. MANUKYAN, A.M. ARZUMANYAN, IMPROVING THE OPERATION CHARACTERISTICS AT THIN-BLADЕ PROCESSING WITH MULTI-TOOTH CORUNDUM MILLERS , Proceedings of Annual Conferences of NPUA: Vol. 2 (2020)
A.V. PETROSYAN, A.A. MKRTCHYAN, MOVEMENT OF THE BODY BY A CURVED TRAJECTORY IN CASE OF A FRICTIONAL FORCE , Proceedings of Annual Conferences of NPUA: Vol. 1 (2022)
N.H. AHARONYAN, THE USAGE OF NEURAL NETWORKS AND COMPARISION OF RESULTS AT CLASSIFYING THE REAL-TIME DATA , Proceedings of Annual Conferences of NPUA: Vol. 1 (2018)
G.S. CHIBUKHCHYAN, IMPROVING THE CORROSION RESISTANCE OF MACHINE PARTS OF THE MINIBUS TRANSMISSION , Proceedings of Annual Conferences of NPUA: Vol. 1 (2021)
A.L. ARSHAKYAN, S.K. JEGIAZARYAN, A.B. BALASANYAN, V.SH. GRIGORYAN, TECHNOLOGY FOR FORMING A REGULAR PLATE-SIZED MICRORELIEF , Proceedings of Annual Conferences of NPUA: Vol. 2 (2018)
L.K. ANDREASYAN , A METHOD FOR ASSESSING PERSONAL WELL-BEING BASED ON FITNESS DATA , Proceedings of Annual Conferences of NPUA: Vol. 1 (2024)
V.A. BALAYAN, E.H. MASHAKARYAN, EXPERIMENTAL STUDIES ON DETERMINING THE RATIONAL RATIO OF FILLERS IN SELF-CURING CONCRETE PRODUCTS , Proceedings of Annual Conferences of NPUA: Vol. 1 (2025)

Previous 21-30 of 174 Next

You may also start an advanced similarity search for this article.

OPTIMAL CONSTRUCTION OF А WHELLED MACHINE FOR QUARRYING WALL STONE OF THE CORRECT FORM

Authors

Keywords:

Abstract

Downloads

Published

Issue

Section

Most read articles by the same author(s)

Similar Articles

edtor